Custom-Engineered Power: The Davey Bareshaft Firefighter® (5150PV3)

For maximum flexibility, custom setups, and uncompromising chemical resistance, the Davey Bareshaft 5150PV3 is the professional’s choice. Engineered as a high-performance, single-stage self-priming centrifugal pump head, it allows you to couple your own custom petrol engine, diesel motor, electric motor, or belt-drive setup.

Upgraded with the V3 package, this model is specifically optimised to withstand harsh agricultural chemicals, making it a dual-threat powerhouse for both firefighting and heavy-duty farm spraying.

Key Features & Benefits

• Bareshaft Versatility: Designed to be long-coupled or belt-driven to virtually any custom prime mover (engine or electric motor) to fit your exact machinery requirements.

• V3 Chemical-Resistant Upgrades: Factory-fitted with Viton® seals, O-rings, gaskets, and caps, providing superior protection against agricultural fertilisers, herbicides, and insecticides.

• Marine-Grade Aluminium Construction: The pump casing, diffusers, and impellers are crafted from high-grade marine aluminium and treated with a heavy-duty interior and exterior epoxy coating for ultimate corrosion resistance.

• Patented Clamped & Thrust-Balanced Impeller: Engineered for a longer working lifespan, easier disassembly during blockages, and minimised bearing load to extend the life of your drive system.

• Floating Impeller Neck-rings: Front neck-rings maximise hydraulic performance and efficiency, while back neck-rings reduce wear and seal stress.

• Flexible 4-Way Discharge Port

Technical Specifications

• Pump Type - Single-Stage, Centrifugal Self-Priming (Bareshaft)

• Seal & Gasket Kit - Viton® (V3 Chemical Upgrade)

• Maximum Flow Rate - Up to 560 Litres per minute (LPM)

• Maximum Total Head - 76 metres

• Maximum Pump Speed - Up to 4250 RPM

• Maximum Suction Lift - Self-priming up to 8 metres

• Pump Shaft Material - 303 Stainless Steel

• Approx. Dry Weight - 6 kg to 8 kg (Bare pump unit)

Versatile Applications

• Custom Firefighting Skids: Tailor-fit onto custom slip-on fire units or utility trucks.

• Agricultural Spraying: Chemical-resistant Viton build safely handles intensive herbicide and pesticide applications.

High-Volume Water Transfer & Irrigation: Reliable performance for shifting large volumes of water across rural properties, filling tanks, or running irrigation lines.

Build your custom fluid system around Australia's most trusted pump engineering.

Extreme High-Pressure Mastery: The Davey Bareshaft Twin-Stage Firefighter® (5250PV3)

When your setup demands massive head pressure to clear steep inclines, push water over long distances, or handle aggressive agricultural chemicals, the Davey Bareshaft 5250PV3 is the ultimate choice.

Engineered as a high-performance, twin-stage self-priming centrifugal pump head, it allows you to couple your preferred custom engine or electric motor (via direct-coupling or belt-drive).Outfitted with the V3 package, it features full chemical-resistant upgrades to tackle intensive farm spraying alongside heavy-duty firefighting.

Key Features & Benefits

• Twin-Stage High-Pressure Design: Dual marine-grade impellers deliver extraordinary pressure capability, making it ideal for long-hose configurations and high-elevation water transfer.

• V3 Chemical-Resistant Upgrades: Factory-equipped with Viton® seals, O-rings, gaskets, and caps, providing exceptional defense against agricultural fertilisers, pesticides, and herbicides.

• Bareshaft Flexibility: Tailor-made to be long-coupled or belt-driven to virtually any custom engine or electric motor matching your unique specifications.

• Marine-Grade Aluminium Build: The pump body, diffusers, and impellers are built from high-grade marine aluminium and finished with a robust interior and exterior epoxy coating for maximum corrosion resistance.

• Patented Clamped & Thrust-Balanced Impeller: Engineered for a prolonged lifespan, minimized bearing load, and effortless cleaning or disassembly in the event of a blockage.

• Floating Impeller Neck-rings: Front neck-rings optimise hydraulic efficiency, while back neckrings reduce wear and extend mechanical seal longevity.

• Flexible 4-Way Discharge Port

Technical Specifications

• Pump Type - Twin-Stage, Centrifugal Self-Priming (Bareshaft)

• Seal & Gasket Kit - Viton® (V3 Chemical Upgrade)

• Maximum Flow Rate - Up to 470 Litres per minute (LPM)

• Maximum Total Head - 120 metres (approx. 1200 kPa)

• Maximum Pump Speed - Up to 4250 RPM

• Maximum Suction Lift - Self-priming up to 7 metres

• Pump Shaft Material - 303 Stainless Steel

• Approx. Dry Weight - 8 kg (Bare pump unit)

Versatile Applications

• High-Head & Long-Distance Fire Defence: Exceptional pressure output for combating fires across multi-level or sprawling rural properties.

• Aggressive Chemical & Crop Spraying: Viton-upgraded internals safely manage heavy agricultural liquid applications.

• Tanker-to-Tanker Transfer & Irrigation: Perfect for high-pressure travelling irrigators, deep tank filling, and demanding water movement tasks.

Engineered for custom setups that demand extreme pressure and chemical durability.

Reliability & High Performance: The Davey Single Firefighter (5155H)

Widely recognized as a cornerstone of rural and emergency preparedness across Australia, the Davey Firefighter 5155Hpairs a dependable, high-output single-stage wet end with the bulletproof reliability of a Honda GX160 petrol engine.

Engineered to deliver exceptional versatility, this lightweight yet rugged portable pump effortlessly balances high flow rates with strong pressure delivery—making it an essential asset for bushfire defence, tank filling, and general agricultural utility.

Key Features & Benefits

• Genuine Honda GX160 Engine: Powered by a legendary 5.5 hp (163 cc) overhead-valve 4-stroke engine featuring low-oil protection to prevent engine damage.

• Versatile Single-Stage Performance: Designed to offer high-volume water output while maintaining strong pressure heads without overloading the motor.

• Marine-Grade Aluminium Build: The pump casing, diffusers, and impellers are constructed from quality corrosion-resistant marine-grade aluminium, finished inside and out with a durable baked polyester powder coat.

• Patented Clamped Impeller Design: Ensures a longer operating lifespan, enhanced hydraulic efficiency, and quick, straightforward disassembly if a blockage occurs.

• Floating Impeller Neck-rings: Front neck-rings maximise pumping performance, while back neck-rings reduce mechanical seal stress and dramatically lower engine wear.

• Flexible 4-Way Discharge Port

• Rapid Self-Priming: Capable of self-priming up to 7 metres from a standing start for flexible setup options.

Technical Specifications

• Starting System- Recoil Start

• Maximum Flow Rate - Up to 500 Litres per minute (LPM)

• Maximum Total Head - Up to 60 to 72 metres (approx. 600–720 kPa)

• Maximum Suction Lift - Self-priming up to 7 metres

• Fuel Tank Capacity - 3.6 Litres

• Approx. Fuel Consumption - ~1.73 L/hr at full load (3600 rpm)

• Dry Weight - 21 kg

Versatile Applications

• Bushfire Preparedness & Property Protection: Quick deployment for ember attacks, spot fires, and perimeter soaking.

• Tanker-to-Tanker Transfer: Efficiently shifts large volumes of water between storage tanks and transport tanks.

• Agricultural & General Utility: Perfect for stock watering, washdown tasks, overhead irrigation, and high-head water transfer.

Stay protected when bushfire threat levels rise. Back your property with Australia's most trusted firefighting pump combination.

Exceptional High-Pressure Performance: The Davey Twin Firefighter (5255H)

When your property layout demands superior head pressure to push water up steep inclines, over long distances, or through long-range fire nozzles, standard pumps fall short. The Davey Twin Firefighter 5255H combines a heavy-duty twin-stage wet end with the legendary reliability of a Honda GX160 petrol engine.

Engineered specifically for rural properties, agricultural contractors, and emergency services, this portable powerhouse delivers extraordinary pressure without compromising on flow efficiency.

Key Features & Benefits

• Genuine Honda GX160 Engine: Powered by a trusted 5.5 hp (163 cc) overhead-valve 4-stroke engine featuring a cast-iron cylinder bore and low-oil alert for maximum longevity and effortless starting.

• Twin-Stage High-Pressure Design: Dual marine-grade impellers work together to generate exceptional total head pressure—ideal for tackling distant spot fires, elevated homes, or long irrigation lines.

• Marine-Grade Aluminium Build: The pump casing, diffusers, and twin impellers are constructed from high-grade marine aluminium and treated with an interior and exterior protective coating for ultimate corrosion resistance.

• Patented Clamped Impeller Design: Built for superior hydraulic performance, reduced bearing load, and quick, straightforward dismantling in the event of a blockage.

• Floating Impeller Neckrings: Front neckrings optimize high-pressure efficiency, while back neckrings reduce mechanical seal stress and lower engine wear.

• Flexible Multi-Port Discharge: Features a versatile multi-outlet configuration allowing you to connect multiple hoses simultaneously for team firefighting or fast water transfer.

• Rapid Self-Priming: Self-primes up to 7 metres from a standing start for flexible placement near dams, tanks, or natural water sources.

Technical Specifications

• Starting System - Recoil Start

• Maximum Flow Rate - Up to 380 Litres per minute (LPM)

• Maximum Total Head - Up to 75 to 80 metres (approx. 750–800 kPa)

• Maximum Suction Lift - Self-priming up to 7 metres

• Fuel Tank Capacity - 3.1 Litres

• Approx. Fuel Consumption - ~1.4 L/hr at full load (3600 rpm)

• Dry Weight- ~26 kg

Versatile Applications

• High-Pressure Bushfire Defence: Delivers the forceful stream needed to reach distant embers, multi-level property boundaries, and steep inclines.

• Long-Distance Water Transfer: Efficiently moves water across large rural expanses or up elevated hillsides.

• Agricultural Utility: Drives high-pressure sprinklers, washdown systems, and specialised farm spraying tasks.

Take control of your fire preparedness. Arm your property with the high-pressure reliability of the Davey 5255H.

Massive Pressure & Dual-Stage Power: The Davey Twin Firefighter (5265H)

When you need to push water up steep inclines, over long distances, or through complex multi-hose layouts, standard single-stage pumps aren't enough. The Davey Twin Firefighter 5265H pairs a heavy-duty twin-stage wet end with the world-renowned performance of a Honda GX200 petrol engine.

Engineered for rural property owners, agricultural contractors, and emergency responders, this powerhouse delivers extraordinary head pressure without sacrificing high flow capacity.

Key Features & Benefits

• Genuine Honda GX200 Engine: Powered by a legendary 6.5 hp (196 cc) overhead-valve 4-stroke engine equipped with a cast-iron cylinder bore and low-oil alert for ultimate reliability.

• Twin-Stage High-Pressure Design: Dual impellers work in tandem to generate exceptional total head pressure—ideal for tackling distant spot fires, multi-story buildings, or long irrigation runs.

• Marine-Grade Aluminium Build: The pump casing, diffusers, and twin impellers are manufactured from high-grade marine aluminium and treated with an exterior and interior protective coating for maximum corrosion resistance.

• Patented Clamped Impeller Design: Built for superior hydraulic performance, reduced bearing load, and quick, straightforward dismantling in the event of a blockage.

• Floating Impeller Neckrings: Front neckrings optimize high-pressure efficiency, while back neckrings reduce mechanical seal stress and lower engine wear.

• Flexible 3 or 4-Way Discharge Port: Features multi-outlet configurations allowing you to hook up multiple hoses simultaneously for team firefighting or fast water transfer.

• Rapid Self-Priming: Self-primes up to 7 metres from a standing start for flexible placement near dams, tanks, or rivers.

Technical Specifications

• Starting System - Recoil Start

• Maximum Flow Rate - Up to 400 Litres per minute (LPM)

• Maximum Total Head - Up to 85 metres (approx. 850 kPa)

• Maximum Suction Lift - Self-priming up to 7 metres

• Fuel Tank Capacity - 3.1 Litres

• Dry Weight - ~28 kg

Versatile Applications

• High-Pressure Bushfire Defence: Excellent pressure output for reaching distant embers, steep property boundaries, and elevated spray patterns.

• Long-Distance Water Transfer: Effortlessly moves water across large rural expanses or up elevated hillsides.

• Agricultural & Irrigation Use: Drives high-pressure sprinklers, boom sprays, and washdown systems with ease.

Demand peak performance when it matters most. Secure your property with the heavy-duty pressure of the Davey 5265H.

High-Flow Portable Power: The Davey Firefighter Single-Stage 5113HE

When you need rapid water movement, dependable reliability, and effortless starting, the Davey Firefighter 5113HE is an exceptional choice. Powered by a legendary GX series Honda petrol engine, this high-flow, single-stage centrifugal pump is engineered to tackle everything from urgent bushfire defence to everyday agricultural water transfer.

Combining Davey’s world-renowned pump hydraulics with Honda's bulletproof engine performance, it delivers unmatched ease of use for rural property owners, contractors, and emergency services.

Key Features & Benefits

• Genuine Honda Petrol Engine: Features a reliable, easy-starting Honda 4-stroke engine equipped with a cast-iron cylinder bore and low-oil protection for long-term engine health.

• High-Volume Single-Stage Performance: Optimized to move massive volumes of water quickly, making it ideal for rapid tank filling, washdowns, and perimeter soaking.

• Marine-Grade Aluminium Build: The pump casing, diffusers, and impellers are manufactured from high-grade marine aluminium and finished with a durable powder coat for maximum corrosion resistance.

• Patented Clamped & Thrust-Balanced Impeller: Designed for superior hydraulic efficiency, longer seal life, and effortless dismantling in the event of a blockage.

• Floating Impeller Neck-rings: Front neck-rings maximise performance and priming capability, while back neck-rings reduce engine wear and mechanical seal stress.

• Flexible 3-Way Discharge Port

Technical Specifications

• Starting SystemRecoil Start (Electric start options available on select variants)

• Maximum Flow RateUp to 450 Litres per minute (LPM)

• Maximum Total HeadUp to 55 metres

• Maximum Suction LiftSelf-priming up to 7 metres

• Pump Shaft MaterialStainless Steel

Versatile Applications

• Bushfire Preparedness & Defence: High-volume output for soaking grounds, ember attacks, and asset protection.

• Rapid Tank Filling & Transfer: Efficiently shifts large amounts of water between storage tanks, dams, and troughs.

• General Farm & Commercial Utility: Perfect for washdown duties, construction site dewatering, and general irrigation.

Ready when you are. Equip your property with the trusted combination of Davey hydraulics and Honda power.

Unmatched High-Pressure Performance: The Davey Firefighter Twin-Stage 5290HE

When bushfires threaten or heavy-duty water transfer is required, compromise is not an option. Powered by a legendary 9-horsepower Honda GX270E petrol engine, the Davey Firefighter 5290HE is a heavy-duty, twin-stage powerhouse engineered to deliver extraordinary pressure and high-volume output.

Trusted by rural property owners, brigades, and agricultural professionals across Australia, it combines effortless electric starting with robust marine-grade construction to tackle the toughest jobs.

Key Features & Benefits

• Genuine Honda GX270E Engine: Features a reliable 270cc engine with a cast-iron cylinder bore, low-oil protection, and a choice of electric start (with recoil backup) for instant, stress-free ignition.

• High-Pressure Twin-Stage Design: Dual impellers provide the versatility of high flow rates coupled with exceptional pressure, allowing you to push water up steep inclines or over long distances.

• Marine-Grade Aluminium Build: The pump body, diffusers, impellers, and 3-way discharge ports are crafted from quality marine-grade aluminium and finished with a baked polyester powder coat (interior and exterior) for ultimate corrosion resistance.

  Patented Floating Impeller Neck-rings: Front neck-rings boost pumping efficiency, while back neckrings dramatically reduce engine wear and extend mechanical seal life.

• Flexible 3-Way Discharge Port: Includes multiple plumbing options (1×2” and 2×1” outlets) for seamless adaptation to your existing hoses and fire-fighting setups.

• Rapid Priming: Features a massive 121​” priming port for quick, easy filling and self-primes up to 6 metres.

Technical Specifications

• Starting System - Electric Start & Recoil Backup (Battery & leads sold separately)

• Maximum Flow Rate - Up to 580 Litres per minute (LPM)

• Maximum Total Head - 92 metres (approx. 920 kPa)

• Maximum Suction Lift - Up to 7 metres

• Fuel Tank Capacity - 5.3 Litres

• Approx. Fuel Consumption - ~2.4 L/hr at full load (3600 rpm)

• Dry Weight - 39 kg (inclusive of roll frame)

Versatile Applications

• Bushfire Defence & Property Protection: High-pressure output capable of reaching high angles and distant spot fires.

• Tanker-to-Tanker Water Transfer: Rapidly moves large volumes of water between storage units.

Agricultural Utility: Exceptional for boom spraying, irrigation, travelling irrigators, and sheep jetting (Viton seal kits available for chemical handling).

Be prepared before fire season strikes. Equip your property with the professional-grade performance of the Davey 5290HE.

Intelligent Remote Defense: The Davey Twin-Stage Remote Start Firefighter® (5290HRS2)

When bushfire threat levels peak, the safest place to be is out of harm's way. The Davey Remote Start Firefighter 5290HRS2 (MKII) combines legendary high-pressure twin-impeller performance with advanced smart-connectivity technology, allowing you to protect your property, livestock, and assets from anywhere without stepping foot near the danger zone.

Powered by an intelligent Honda iGX270E electronic-control engine and built-in cellular communication, this top-tier system lets you command your fire defense via SMS, automated scheduling, external heat sensors, or remote triggers.

Key Features & Intelligent Capabilities

• Smart SMS Remote Operation:Built with an integrated 2G/3G/4G modem and a factory-fitted SIM (utilizing the Telstra network in Australia).Start or stop your pump instantly via SMS text message from your mobile phone.

• Multi-User Status Feedbacks:Keeps multiple registered users informed in real time.Receive automatic SMS updates and warnings regarding pump status, successful starts/stops, low battery alerts, and service reminders.

  Flexible Trigger Options:Can be configured to launch automatically via external heat sensors, panic buttons, float switches (for tank levels), pressure switches, or timed run schedules.

• Honda iGX270E Smart Engine:Features an advanced 270cc electronic-control engine with electric start and recoil backup, coupled with automated low-oil protection that shuts the engine down safely to prevent damage.

• Twin-Stage High-Pressure Power:Dual marine-grade aluminium impellers generate massive head pressure, making it ideal for pushing water up steep inclines, over long property boundaries, or feeding high-pressure sprinkler arrays.

• Patented Davey Hydraulics:Incorporates a clamped, thrust-balanced impeller design with floating neckrings for optimised efficiency, reduced seal wear, and easy maintenance.

Technical Specifications

• Starting Systems - Key Electric Start, Recoil Backup, SMS Remote, Timed, or Sensor-Activated

• Connectivity - Built-in 2G/3G/4G Modem with Factory-Fitted Telstra SIM

• Maximum Flow Rate - Up to 430–590 Litres per minute (LPM)

• Maximum Total Head - Up to 90 to 106 metres (approx. 900–1060 kPa)

• Maximum Suction Lift - Self-priming up to 6 metres

Versatile Applications

• Off-Site Bushfire Defense:Activate perimeter soaking or property defense systems remotely when evacuation or safe distance is required.

• External Home Protection Systems:Automate roof and property-perimeter sprinkler setups during ember attacks.

• Remote Water Tank Management:Effortlessly pump water across large distances or heights from hard-to-reach storage tanks.

• General Agricultural Utility:High-head water transfer, irrigation, and tanker-to-tanker operations managed effortlessly.

Eliminate travel time to danger zones and secure ultimate peace of mind. Take command of your fire safety infrastructure from anywhere.

Ultimate Reliability When It Matters Most: The Davey Firefighter Diesel (5148YEV)

Protect your property, livestock, and livelihood with Australia’s gold standard in portable firefighting equipment. Built tough for harsh conditions, the Davey Firefighter Diesel 5148YEV pairs a heavy-duty, corrosion-resistant single-stage pump with a world-renowned Yanmar L48N Diesel engine.

Whether you are preparing for bushfire season, managing daily farm irrigation, or conducting agricultural crop spraying, this machine delivers uncompromised diesel power and safety.

Key Features & Benefits

• Robust Yanmar L48N Diesel Engine: Equipped with an electric start and a reliable cast-iron cylinder bore, offering effortless starting and long-term durability.

• Built-In Power Reserves: Specially designed impeller inserts allow high-head performance at 3600 rpm without overloading the engine.Vital power reserves remain available during extreme temperatures, altitude, or humidity spikes—critical during a bushfire.

• Chemical & Herbicide Ready: Factory-upgraded with Viton seals and O-rings, making it fully compatible with agricultural chemical, herbicide, and insecticide spraying.

• Marine-Grade Aluminium Construction: The pump casing, diffusers, and impellers are manufactured from marine-grade aluminium with an exterior and interior epoxy coating for maximum corrosion resistance.

• Flexible 4-Way Discharge Port: Offers easy installation options with a choice of plumbing sizes to fit your exact setup.

• Patented Impeller Design: Features Davey’s unique clamped, thrust-balanced impeller with floating front and back neck-rings to improve efficiency, extend seal life, and minimise engine wear.

Technical Specifications

• Starting System: Electric Start

• Maximum Flow Rate: Up to 400 Litres per minute (LPM)

• Maximum Total Head: 50 metres

• Maximum Suction Lift: Up to 5 metres (self-priming at 3600 rpm)

• Maximum Water Temperature: 50°C

Versatile Applications

• Bushfire & Spot Fire Defence: Rapid asset and perimeter protection.

• Crop & Pasture Spraying: Handles harsh agricultural chemicals seamlessly thanks to Viton internal components.

• General Farm Utility: Ideal for high-volume stock watering, tank filling, washdowns, and general water transfer.

Don't wait for an emergency to get caught out. Invest in the industry leader trusted across Australia and the world.

Complete Emergency Readiness: The Davey Firefighter® Hose Kit (FFHK/01)

Pair your Davey Firefighting pump with the ultimate all-in-one plumbing solution. The Davey Firefighter Hose Kit (FFHK/01) is a professionally packaged set designed to take the guesswork out of setting up your pump, ensuring you have robust, high-performance lines ready to draw water and suppress fires instantly.

Kit Inclusions & Features

• Heavy-Duty Suction Hose: A robust 6-metre length with a 38mm (1.5") diameter, engineered to prevent collapsing under suction while drawing water from dams, tanks, or streams.

• High-Pressure Discharge Hose: A generous 20-metre length with a 20mm diameter, providing ample reach to manoeuver around assets, buildings, and perimeter zones.

• Foot Valve & Strainer: Essential for keeping your suction line primed and preventing debris, leaves, and sediment from clogging or damaging your pump’s internal impellers.

• Durable Brass Nuts & Tails: Premium, corrosion-resistant brass hardware for secure, leak-free connections to your pump inlets and outlets.

• Adjustable Spray Nozzle: Easily toggle between a powerful long-range stream (for reaching distant spot fires) and a wide, cooling mist pattern (for asset protection and ember defense).

Quick Overview

• Suction Hose - 6 metres length × 38 mm diameter

• Discharge Hose - 20 metres length × 20 mm diameter

• Included Hardware - Foot valve, strainer, brass nuts & tails, adjustable nozzle

• Compatibility - Universal fit for standard portable fire pumps (optimised for Davey single and twin-stage fire fighters)

Don't leave your fire-fighting readiness half-finished. Match your high-performance Davey pump with a complete, matched hose package.

Compact & Clever Automatic Drainage: The Davey Vortex Sump Pump (D15VAGMA)

Designed for reliability in tight spaces, the Davey Vortex Sump Pump (D15VAGMA) is a compact, multi-purpose submersible drainage pump featuring a convenient vertical float switch. Engineered to handle clean water, greywater, and light slurries containing small soft solids, it is the ideal drop-in solution for narrow sumps, pits, and cellars where standard tethered floats might jam.

Key Features & Benefits

• Vertical Float Switch (AGMA): Compact fixed-arm vertical float mechanism specifically tailored for automated operation in confined sumps and pits where horizontal swinging room is limited.

• Integrated Recirculation Port: Features a unique built-in recirculation port designed to keep soft solids agitated within the sump, preventing accumulation and improving the pump's clearing efficiency.

• Vortex Open-Impeller Design: Semi-vortex centrifugal hydraulics allow soft solids up to 20 mm in diameter to pass freely, making it far less susceptible to clogging.

  Corrosion-Resistant 304 Stainless Steel: Critical components—including the motor shell, pump shaft, strainer, handle, and fasteners—are built from high-grade stainless steel for a long operating life.

• Oil-Bath Mechanical Seal: Equipped with a hard-faced silicon carbide/ceramic seal on the pump side operating in an oil bath, protected further by a sand-slinger lip seal.

• Built-in Thermal Overload: Automatically protects the motor against overheating during heavy cycles.

Technical Specifications

• Motor Output - 150W (0.15kW)

• Electrical Supply - 220–240V, 50Hz, Single Phase (1.5 A running amp)

• Maximum Flow Rate - Up to 140 Litres per minute (LPM)

• Maximum Total Head - Up to 7 metres

• Max. Soft Solid Diameter - Up to 20 mm

• Float Switch Operation - Pump Start: ~230 mm above base, Pump Stop: ~140 mm above base

• Materials of Construction - 304 Stainless Steel (Shaft, Shell, Handle, Fasteners), Glass-Filled Polycarbonate Casing & Impeller

• Power Cable - 10-metre heavy-duty HO7RN-F oil-resistant lead with 3-pin plug

Versatile Applications

• Confined Sump & Pit Emptying: Perfect for narrow domestic or light commercial sumps where traditional float switches get stuck.

• Greywater Pumping: Safely manages household or commercial greywater containing up to 10% small soft solids.

• Septic Effluent Disposal: Reliable transfer of treated effluent and light organic liquid waste.

• Rainwater & Stormwater Management: Effective for clearing nuisance water accumulation in below-ground spaces.

Take the guesswork out of tight-space drainage. Keep your sumps automatically cleared with Davey engineering.

High-Performance Compact Drainage: The Davey Vortex Sump Pump (D25VA)

When you need a reliable, compact pump that punches above its weight in tight spaces, the Davey Vortex Sump Pump (D25VA) is an exceptional choice. Engineered for automated greywater, stormwater, and effluent transfer, this robust submersible pump features a clever vertical float switch (AGMA) to fit snugly into narrow pits, sumps, and cellars where traditional dangling float switches would jam.

Key Features & Benefits

• Space-Saving Vertical Float Switch: Fitted with an automated vertical magnetic/mechanical float switch, allowing reliable operation in extremely narrow sumps and confined drainage chambers.

• Vortex Impeller Hydraulics: Semi-vortex open impeller design allows soft solids and debris to pass through easily, drastically reducing the risk of clogging or jamming.

• Built-In Recirculation Port: Features an integrated purging port designed to agitate sediment and prevent solid accumulation at the base of your sump pit.

• Corrosion-Resistant Build: Constructed with a high-grade 304 stainless steel motor shell, shaft, handle, and fasteners, coupled with tough glass-filled engineering polymers for long-term rust protection.

• Reliable Mechanical Sealing: Features a hard-wearing carbon/ceramic and silicon carbide mechanical seal running in an oil bath, protected by an additional lip seal and sand-slinger.

• Thermal Overload Protection: Built-in auto-reset thermal cut-out protects the motor against overheating during heavy operational cycles or blockages.

Technical Specifications

• Motor Output - 250W (0.25kW)

• Electrical Supply - 220–240V, 50Hz, Single Phase

• Maximum Flow Rate - Up to 180 Litres per minute (LPM)

• Maximum Total Head - Up to 8.5 metres

• Max. Soft Solid Diameter - Up to 25 mm

• Materials of Construction - 304 Stainless Steel (Shaft, Shell, Fasteners) & Glass-Filled Engineering Plastics

• Power Cable - 10-metre heavy-duty HO7RN-F lead with 3-pin plug

Versatile Applications

• Narrow Sump & Pit Drainage: Perfectly sized for tight domestic or commercial drainage chambers.

• Stormwater & Flood Management: Safely evacuates nuisance water accumulation from cellars, basements, and car parks.

• Greywater & Effluent Transfer: Efficiently pumps domestic wastewater containing up to 10% soft organic solids.

Compact footprint, uncompromising performance. Keep your drainage systems automatic and worry-free with Davey engineering.

Reliable General-Purpose Drainage: The Davey Dewatering Sump Pump (D40M)

Engineered for versatile fluid transfer and rapid site dewatering, the Davey Dewatering Sump Pump (D40M) is a robust, manual-operation submersible pump built to handle clean or slightly dirty water. Featuring a dependable 400W motor and an open-impeller centrifugal layout, it is an ideal all-rounder for clearing rainwater, emptying sumps, and draining flooded environments.

Key Features & Benefits

• Open-Impeller Centrifugal Design: Expertly designed to handle small soft solids in suspension (up to 10 mm or 10% small soft organic solids), making it far less susceptible to clogging or blockages in pipework.

• Double Mechanical Shaft Seal: Operates in an oil bath featuring a hard-faced silicon carbide/ceramic seal on the pump side, paired with a protective sand-slinger lip seal for extended motor life and superior water-ingress defense.

• Corrosion-Resistant Build: Built with a durable 304 stainless steel motor shell, strainer, handle, and fastenersalongside a heavy-duty cast-iron pump body and motor top for long-term rust protection.

• Manual Control Operation ("M" Model): Designed for direct plug-and-play manual control, making it perfect for targeted dewatering jobs where an attached automatic float switch isn't required.

• Built-In Thermal Overload: Features an automatic-reset thermal cut-out that protects the motor from burning out during heavy loads or accidental over-current situations.

• Heavy-Duty Power Lead: Supplied with a 10-metre oil-resistant HO7RN-F power lead and 3-pin plug for flexible positioning and reliable outdoor durability.

Technical Specifications

• Motor Output (P1) - 400W (0.4kW)

• Electrical Supply - 220–240V, 50Hz, Single Phase (Running Amps: 3.7 A)

• Maximum Flow Rate - Up to 240–250 Litres per minute (LPM)

• Maximum Total Head - 12 metres

• Maximum Submergence Depth - 10 metres

• Maximum Water Temperature - Up to 50°C

• Discharge Outlet Size - 2” BSP Male / 50mm

• Max. Soft Solid Diameter - Up to 10 mm

• Materials of Construction - 304 Stainless Steel (Motor Shell, Shaft, Strainer, Handle) & Cast Iron (Pump Body, Motor Top, Impeller)

Versatile Applications

• Site & Foundation Dewatering: Rapidly clears water from building footings, trenches, and construction excavations.

• Cellar & Garage Flood Recovery: Efficiently pumps out unwanted stormwater or surface water accumulation from low-lying spaces.

• Sump & Pit Emptying: Clears drainage collection pits, garden ponds, and ditches.

• General Water Transfer: Handles clean or greywater movement across residential, rural, and light commercial properties.

Dependable power when water needs to move fast. Trust Davey engineering to keep your lower-level spaces clear.

High-Head Heavy-Duty Waste Management: The Davey Single Channel Sump Pump (D75SA)

Engineered for demanding sewage and stormwater applications, the Davey Single Channel Sump Pump (D75SA) is a robust, high-head submersible pump built to handle tough waste duties. Featuring an efficient single-channel open impeller design and an automated tethered float switch, it effortlessly manages greywater, blackwater, and soft solids without risking blockages

Key Features & Benefits

• Single-Channel Open Impeller: Specifically engineered to handle soft solids in suspension while delivering higher head pressure and minimizing the risk of clogging in the pump or pipework.

• Automatic Float Switch Operation: Fitted with a pre-set tethered float switch ("A" model) for safe, unattended, automated on/off control.

• Corrosion-Resistant Construction: Built with a high-grade 304 stainless steel motor shell, shaft, and fasteners for long-term durability and protection against aggressive wastewater environments.

• Double Mechanical Shaft Seal: Operates in an oil bath featuring a hard-faced silicon carbide/ceramic seal on the pump side, supplemented by a sand-slinger lip seal to maximise motor protection.

• Built-In Thermal Overload: Automatically protects the motor against overheating and over-current scenarios, ensuring a long operational life.

• Slide Rail Compatibility: Fully compatible with Davey slide rail kits (such as the SR50, sold separately) for easy removal, maintenance, and re-installation in deep pits.

Technical Specifications

• Motor Output - 0.75 kW (1.0 hp)

• Electrical Supply - 220–240V, 50Hz, Single Phase

• Full Load Current - 7.5 A

• Maximum Flow Rate - Up to 360 Litres per minute (LPM)

• Maximum Total Head - High-head performance profile

• Impeller Type - Open centrifugal single-channel

• Power Cable - 10-metre heavy-duty HO7RN-F oil-resistant lead

• Materials of Construction - 304 Stainless Steel (Shaft, Shell, Fasteners)

Versatile Applications

• Sewage & Blackwater Disposal: Reliable removal of domestic and commercial sewage waste.

• Stormwater & Flood Mitigation: Rapid evacuation of heavy stormwater run-off from below-ground pits.

• Septic Effluent Management: Efficient transfer of treated or primary septic waste.

• Industrial & Factory Waste: Handles light slurries, washdown liquids, and greywater transfer.

Dependable power for heavy-duty waste management. Keep your property clear of complex blockages with Davey engineering.

Heavy-Duty Solids Handling: The Davey Vortex Sump Pump (DT08V)

When you need to clear dirty water, stormwater laden with debris, or greywater containing soft solids, standard sump pumps can easily clog and fail. The Davey Vortex Sump Pump (DT08V) is engineered with a wide-clearance vortex impeller that allows soft debris to pass smoothly through the pump body without jamming or damaging internal components.

Built with rugged corrosion-resistant materials, it is the ideal choice for residential, commercial, and agricultural drainage applications.

Key Features & Benefits

• Vortex Impeller Design: The recessed vortex impeller creates a whirlpool effect that pulls water and debris through the pump with minimal contact, reducing wear and preventing clogging from stringy materials or soft solids.

• Robust Stainless Steel Construction: Features a durable 304 stainless steel motor shell and shaft, ensuring long-term resistance against rust and aggressive wastewater environments.

• Automatic Operation: Equipped with a built-in or tethered float switch (depending on configuration) that automatically starts the pump when water levels rise and turns it off when the job is done.

• Built-In Thermal Protection: Features automatic-reset thermal overload protection to safeguard the motor from overheating during heavy duty cycles or dry-run situations.

• Dual Mechanical Seal: Operates in an oil bath for extended service life and superior motor protection against water ingress.

Technical Specifications

• Motor Output - 0.8 kW (approx. 1.1 hp)

• Electrical Supply - 240V, 50Hz, Single Phase

• Maximum Flow Rate - Up to 260–300 Litres per minute (LPM)

• Maximum Total Head - Up to 11 to 13 metres

• Max. Soft Solid / Free Passage - Up to 35 mm to 40 mm diameter

• Discharge Size - 2" BSP / 50 mm

• Materials of Construction - 304 Stainless Steel (Shaft & Motor Shell), Cast Iron / Engineering Plastics (Hydraulic Casing)

Versatile Applications

• Stormwater & Drainage Pits: Reliable evacuation of below-ground stormwater collection sumps.

• Greywater & Sullage Pumping: Safely handles household or light commercial greywater transfer.

• Basement & Cellar Flood Recovery: Rapidly clears unwanted water ingress from flooded spaces containing minor debris.

• Agricultural Wastewater: Drains pits, washdown bays, or animal shelters carrying soft organic waste.

Prevent costly blockages and flood damage. Keep your drainage infrastructure clear with the reliability of the Davey DT08V.

Advanced Dual-Pump Management: The Davey Sump Master Mini Kit (KDS2D40M)

Designed for robust, automated wastewater and stormwater management, the Davey Sump Master Mini Kit (KDS2D40M) provides a complete, out-of-the-box dual-pump solution.Engineered to safeguard basements, cellars, pits, and commercial utility spaces against flooding, this package pairs a smart control system with two heavy-duty submersible pumps.

Kit Inclusions & System Features

• Sump Master Mini Control Box:Provides fully automatic, alternating control and protection for dual manual sump pumps.Features simple Auto/Off/Manual operation switches.

• Complete Float Switch Array:Includes 3 precision floats (Low-level, Start, and High-level/Alarm) to accurately manage water levels, sequence pump cycles, and trigger high-water warnings.

• Dual Davey D40M Submersible Pumps:Comes equipped with two 400W manual dewatering pumps optimized for clearing clean or slightly dirty water.

• Integrated Alarm System:Built-in warning light and buzzer activate immediately if water levels reach critical heights.

• Building Management System (BMS) Compatibility: Easily integrates into broader property or facility management networks for remote error and status monitoring.

Technical Specifications

• Included Pumps - 2× Davey D40M (Manual Submersible Dewatering Pumps)

• Motor Output (Per Pump) - 400W (0.4kW)

• Supply Voltage - 240V / 50Hz (Single Phase)

• Maximum Flow Rate - Up to 250 Litres per minute (LPM) per pump

• Maximum Total Head - 12 metres

• Outlet Size - 2” BSP Female / 50mm

• Max. Soft Solid Diameter - 10 mm

• Pump Construction Materials - 304 Stainless Steel (motor shell, shaft, handle, fasteners) & Glass-Filled Polycarbonate

Versatile Applications

• Basement & Cellar Flood Protection: Reliable redundancy setup ensuring backup protection if one pump encounters high influx or maintenance needs.

• Stormwater & Sump Evacuation: Ideal for clearing pits, ditches, and below-ground car park sumps.

• Commercial & Residential Greywater Management:Handles clean or slightly dirty neutral-pH water containing up to 10% small soft solids.Versatile Applications

Eliminate flood risks with automated redundancy. Secure your infrastructure with Davey's trusted dual-pump water management system.

Compact Domestic Water Pressure: The Davey Dynajet X50 (XJ50P)

As the entry-level model in Davey's popular Dynajet series, the Davey Dynajet X50 (featuring the XJ50P pump paired with a base-mounted 40-litre pressure tank) is an economical, reliable water pressure system.Operated via a traditional adjustable pressure switch, it is specifically engineered to provide automatic, steady water pressure for average-sized residential homes and general property transfer.

Key Features & Benefits

• Jet-Assisted Centrifugal Design:Smoothly self-primes up to 7 metres, making it exceptional for drawing water from above-ground or underground rainwater tanks where the source sits below the pump.

• Traditional Pressure Switch Operation:Factory-calibrated to start automatically when a tap is turned on and pressure drops, and shut off once flow ceases.The switch is fully adjustable to suit specific installation requirements.

• Base-Mounted 40-Litre Supercell Tank: Unlike its smaller 8-litre counterparts, the X50 typically pairs with a larger 40P captive-diaphragm pressure vessel. This provides a larger buffer of stored water, significantly reducing pump start-stop frequency ("short-cycling") and extending motor life.

• Corrosion-Resistant Engineering:Built with a glass-filled Noryl pump casing, a glass-filled polycarbonate impeller, and a durable 303 stainless steel shaft for long-term rust resistance.

• TEFC Motor Protection:Equipped with a Davey-manufactured Totally Enclosed Fan Cooled (TEFC) motor featuring an IP55 enclosure to block out dust, dirt, and moisture.

• Built-In Thermal Overload:Features an automatic-reset thermal cut-out that protects the motor from high operating temperatures and over-current scenarios.

Technical Specifications

• Model Code / Series - X50 (XJ50P pump with 40P tank system)

• Motor Input Power (P1) - 0.84 kW

• Motor Output Power (P2) - 0.56 kW (approx. 0.75 hp)

• Electrical Supply - 220–240V, 50Hz, Single Phase (3.6 A Full Load Current)

• Maximum Flow Rate - Up to 50 Litres per minute (LPM)

• Maximum Total Head - 46 metres (approx. 460 kPa)

• Maximum Suction Lift - Up to 7 metres

• Factory Pressure Settings - Cut-in: 180 kPa / Cut-out: 390 kPa

• Inlet / Outlet Size - Inlet: 1” BSP (Female), Outlet: 1” BSP (Female)

• Pressure Tank Capacity - 40 Litres (Supercell 40P with heavy-duty butyl diaphragm)

Versatile Applications

• Standard Domestic Water Supply:Perfectly sized for supplying dependable water pressure to small-to-average residential homes and modern household appliances.

• Rainwater Harvesting: Ideal for utilizing stored tank water for household use, toilets, and laundry applications.

• Garden Irrigation & Boosting: Excellent for running domestic garden sprinklers, hoses, or boosting lagging incoming mains water pressure.

Efficient Domestic Water Pressure: The Davey Dynajet X70 (XJ70)

Engineered for reliable, automated household water supply, the standalone Davey Dynajet X70 (featuring the XJ70 pump body) delivers smooth, high-pressure performance. Designed for flexibility, it can be paired with your choice of pressure tank, electronic controller, or used as a standalone transfer pump for residential and property applications.

Key Features & Benefits

• Jet-Assisted Centrifugal Design: Capable of self-priming up to 7 metres from a standing start, making it exceptional for drawing water from underground or above-ground rainwater tanks where the source sits below the pump.

• Corrosion-Resistant Engineering: Built with a robust glass-filled Noryl pump casing, a glass-filled polycarbonate impeller, and a 303 stainless steel shaft sleeve for long-term rust defense.

• TEFC Motor Protection: Features a Totally Enclosed Fan Cooled (TEFC) Davey-manufactured motor with an IP55 enclosure to keep out dust, dirt, and moisture in outdoor installations.

• Built-In Thermal Overload: Protects the motor against high operating temperatures and excessive current draw with an automatic-reset thermal cut-out.

• Flexible System Integration: Can be easily configured with an electronic controller (like a Torrium2) or a traditional pressure tank and switch setup depending on your specific water pressure requirements.

Technical Specifications

Model Code / Series - X70 (XJ70 Pump Unit)

Motor Output (P2) - 0.6 kW (approx. 0.8 hp)

Electrical Supply - 220–240V, 50Hz, Single Phase (5.1 A Full Load Current)

Maximum Flow Rate - Up to 70 Litres per minute (LPM)

Maximum Total Head - 48 metres (approx. 480 kPa)

Maximum Suction Lift - Up to 7 metres

Versatile Applications

• Domestic Water Pressure Systems: Ideal as the core pump unit for supplying pressurized water to average-sized residential homes (comfortably supporting multiple active outlets simultaneously).

• Rainwater Harvesting: Seamlessly pulls stored rainwater for household plumbing, toilet flushing, and laundry use.

• Garden Irrigation & Transfer: Excellent for running garden sprinklers, washdown hoses, or general property water transfer tasks.

High-Capacity Domestic Water Pressure: The Davey Dynajet X90 (XJ90)

When your property demands higher flow rates to support multiple simultaneous water outlets without sacrificing pressure, the standalone Davey Dynajet X90 (featuring the high-performance XJ90 pump body) delivers exceptional results. Engineered for versatility, it can be paired with an electronic controller (such as a Torrium2) or a traditional pressure tank setup to suit your custom water delivery needs.

Key Features & Benefits

• High-Flow Jet-Assisted Design: Generates impressive flow rates up to 90 LPM while maintaining self-priming capability up to 7 metres—perfect for drawing water from underground or above-ground rainwater tanks.

• Corrosion-Resistant Construction: Built with a robust glass-filled Noryl pump casing, a glass-filled polycarbonate impeller, and a 303 stainless steel shaft sleeve for outstanding durability against rust and wear.

• TEFC Motor Protection: Equipped with a Totally Enclosed Fan Cooled (TEFC) motor featuring an IP55 enclosure to protect against dust, moisture, and outdoor elements.

• Built-In Thermal Overload: Automatically safeguards the motor from overheating during heavy use or extended operational cycles.

• Flexible Setup Options: Supplied as a standalone pump unit, allowing you to configure it with your preferred pressure controller, switch, or tank system.

Technical Specifications

• Model Code / Series - X90 (XJ90 Pump Unit)

• Motor Output (P2) - 0.9 kW (approx. 1.2 hp)

• Electrical Supply - 220–240V, 50Hz, Single Phase (6.1 A Full Load Current)

• Maximum Flow Rate - Up to 90 Litres per minute (LPM)

• Maximum Total Head - 48 metres (approx. 480 kPa)

• Maximum Suction Lift - Up to 7 metres

Versatile Applications

• Larger Domestic Water Supply: Ideal as the core pump for supplying pressurized water to larger multi-fixture homes, comfortably supporting multiple active taps, showers, and appliances simultaneously.

• Rainwater Harvesting & Plumbing: Efficiently feeds stored rainwater into household plumbing, toilets, and laundries.

• Garden Irrigation & Boosting: Excellent for running larger garden sprinklers, automatic irrigation systems, or boosting incoming mains pressure.

Reliable Domestic Water Pressure: The Davey Dynajet XJ70P8

Engineered for dependable, automated household water supply, the Davey Dynajet XJ70P8 pairs a high-performance single-stage jet-assisted pump with an 8-litre compact pressure vessel. It is an ideal, space-saving solution designed to deliver steady, pressurised water to average-to-large residential homes and modern appliances.

Key Features & Benefits

• Jet-Assisted Centrifugal Design:Capable of self-priming up to 7 metres, making it exceptional for drawing water from underground or above-ground rainwater tanks where the water source sits below the pump.

• Automatic Pressure Switch Control: Automatically starts the pump when a tap is opened and pressure drops, and shuts it off when water flow ceases.

• 8-Litre Buffer Tank: The integrated pressure vessel prevents rapid "short-cycling" of the motor during low-demand tasks (like minor leaks or filling a glass), extending motor life.

• Corrosion-Resistant Build:Constructed with a robust glass-filled Noryl pump casing, a glass-filled polycarbonate impeller, and a 303 stainless steel shaft sleeve for long-term rust defense.

• TEFC Motor Protection:Features a Totally Enclosed Fan Cooled (TEFC) Davey-manufactured motor with an IP55 enclosure to keep out dust, dirt, and moisture.

  Built-In Thermal Overload:Protects the motor against high operating temperatures and excessive current draw with an automatic-reset thermal cut-out.

Technical Specifications

• Model Code / SeriesXJ70P8 (XJ70P pump paired with an 8L tank)

• Motor Output (P2)0.8 kW (approx. 1.1 hp)

• Electrical Supply220–240V, 50Hz, Single Phase (5.1 A Full Load Current)

• Maximum Flow RateUp to 70 Litres per minute (LPM)

• Maximum Total Head48 metres (approx. 480 kPa)

• Maximum Suction LiftUp to 7 metres

• Factory Pressure SettingsCut-in: 210 kPa / Cut-out: 420 kPa

• Inlet / Outlet Size

• Pressure Tank Capacity8 Litres (Heavy-duty captive butyl diaphragm)

Versatile Applications

• Domestic Water Supply: Ideal for supplying pressurized water to average-to-large single or double-storey homes (comfortably supporting 3 to 5 active taps simultaneously).

• Rainwater Tank Utilization: Seamlessly harvests stored rainwater for household plumbing, toilets, and laundry use.

• Pressure Boosting & Irrigation: Perfect for boosting mains pressure or running garden irrigation systems and sprinklers.

High-Capacity Domestic Water Pressure: The Davey Dynajet XJ90P8

When your household requires higher flow rates to support multiple simultaneous water outlets without dropping pressure, the Davey Dynajet XJ90P8 steps up. Pairing a powerful single-stage jet-assisted centrifugal pump with a compact 8-litre pressure vessel, this fully automatic pressure system delivers robust, reliable water supply for busy homes and properties.

Key Features & Benefits

• High-Flow Jet-Assisted Design: Generates impressive flow rates up to 90 LPM while maintaining self-priming capability up to 7 metres—perfect for drawing from underground or above-ground rainwater tanks.

• Automatic Pressure Switch Operation: Features a factory-calibrated pressure switch that turns the pump on automatically when a tap opens and shuts it off securely when flow stops.

• 8-Litre Supercell Buffer Tank: The heavy-duty captive diaphragm pressure vessel absorbs pressure fluctuations and prevents rapid "short-cycling" during minor water usage, extending motor longevity.

• Corrosion-Resistant Engineering: Built with a rugged glass-filled Noryl pump casing, a glass-filled polycarbonate impeller, and a 303 stainless steel shaft sleeve for exceptional durability against rust and wear.

• TEFC Motor Protection: Equipped with a Totally Enclosed Fan Cooled (TEFC) motor featuring an IP55 enclosure to protect against dust, moisture, and outdoor weather conditions.

• Built-in Thermal Overload: Automatically safeguards the motor from overheating during heavy use or extended operational cycles.

Technical Specifications

• Model Code / SeriesXJ90P8 (XJ90P pump paired with an 8L tank)

• Motor Output (P2) - 0.9 kW (approx. 1.2 hp)

• Electrical Supply - 220–240V, 50Hz, Single Phase (6.1 A Full Load Current)

• Maximum Flow Rate - Up to 90 Litres per minute (LPM)

• Maximum Total Head - 48 metres (approx. 480 kPa)

• Maximum Suction Lift - Up to 7 metres

• Factory Pressure Settings - Cut-in: 210 kPa / Cut-out: 420 kPa

• Pressure Tank Capacity - 8 Litres (Heavy-duty captive butyl diaphragm)

Versatile Applications

• Larger Domestic Water Supply: Ideal for supplying pressurized water to larger multi-fixture homes, comfortably supporting 4 to 6 active taps simultaneously (e.g., showers, washing machine, and kitchen sink running together).

• Rainwater Harvesting & Plumbing: Efficiently feeds stored rainwater into household plumbing, toilets, and laundries.

• Garden Irrigation & Boosting: Excellent for running larger garden sprinklers, automatic irrigation systems, or boosting low incoming mains pressure.