The Husqvarna K 770 is a powerful all-round power cutter with features that make it one of the best power cutters on the market. Equipped with semi-automatic SmartTension™ system allows for optimal power transmission, minimum wear and maximum belt life. The light weight, outstanding power-to-weight ratio, the reliable start and exceptionally low vibrations mean less strain and maximised productivity. Suitable for road work and easy to cut in a straight or curved track or close to sidewalk when used with KV7 trolley.

• POWER CUTTER K 770 14" | 1" / 20mm

• Output Power - 3.7kW

• Cutting Depth - MAX 125mm

• Blade Diameter - MAX 350mm

Sturdy, reliable, light and powerful - the K 970 power cutter is ready to perform when you are. The ultimate choice when you need an all-round cutter performing in the toughest conditions, withstanding climate and fuel variations. Suitable for road works when used with the corresponding KV 970 trolley. The trolley also means you can fully concentrate on the cutting job.

• POWER CUTTER K 970 16" | 20mm/1"

• Output Power - 4.8kW

• Cutting Depth - MAX 155mm

• Blade Diameter - MAX 400mm

Some jobs require exceptional power. The K 1270 is a real powerhouse with an impressive 5,8 kW output, turning your heaviest cutting jobs into a fast and effective operation. Suitable for road works when used with the corresponding KV 9/12 trolley. The trolley also means you can fully concentrate on the cutting job.

• POWER CUTTER K 1270 16" | 1" / 20mm

• Output Power - 5.8kW

• Cutting Depth - MAX 145mm

• Blade Diameter - MAX 400mm

This electric all-round cutter minimises the amount of water and slurry. Unlike other electric cutters, the blade rotates forward, cutting into the material efficiently with minimum effort on the operator. K 4000 is easily adaptable for dry cutting with the Vac attachment accessory for minimal dust generation.

• POWER CUTTER K 4000 220-240 V | AU

• Cutting Depth - MAX 125mm

• Blade Diameter- MAX 350mm

• Rated Input Power - 27kW

K 1 PACE high power battery cutter has the power and performance you expect from equivalent petrol-powered cutters. Equipped with X-Halt™ brake function for operational safety. Ergonomic and user-friendly with low vibrations, optimally balanced machine and zero CO₂ emissions during use. With built-in connectivity so you can easily monitor machine location, runtime, service intervals and receive wireless updates through FOTA (firmware over the air). Powered by Husqvarna PACE battery system with high power and fast charging for impressive productivity and a well-suited match with our specially designed battery blade range for maximised cutting depth and optimised performance. Suitable for concrete pipes, concrete garden plates, cinder blocks and so on.

• POWER CUTTER K 1 PACE 14" / 350 mm | BLE | EU/ROW

• Cutting depth - MAX 145mm

• Blade diameter - MAX 361mm

• Tool Only

When you need to make deep cuts fast our K 970 Ring is the answer. It has an exceptionally cutting depth of 270 mm, twice the amount of a traditional power cutter. It has a high cutting capacity, can make deep cuts from one side and is the quickest method for small and medium-sized cuts, as no time is lost on installing rails.

• POWER CUTTER K 970 Ring 370 mm

• Output Power - 4.8kW

• Cutting Depth - MAX 270mm

The petrol power cutter Husqvarna K 970 two-bolt Chain has a unique cutting depth, allowing you to cut 450 mm from one side. It can also make openings as small as 12 x 12 cm, which makes it perfect for irregularly shaped openings. Ideal for cutting minor adjustments to window and door openings, when you don't want to over-cut the corner. Bar and chain not included (sold separately)

• POWER CUTTER K 970 Chain 2-bolt

• Output Power - 4.8kW

• Cutting Depth - MAX 450mm

• Max Engine/Motor - 9300rpm

Handheld electric core drill with attractive design and functional ergonomics. The motor is designed with a pistol grip giving you greater control. Handheld core drilling up to 80 mm or drilling with stand up to 150 mm. Suitable for light applications such as ventilation, plumbing pipes and electrical sockets and cables. DM 230 is an excellent choice for professionals as well as semi-professionals. Drill Stand sold separately.

• DRILL MOTOR DM 230 220-240 V | Without Elgard | AU

• Rated Input Power - 1.85kW

• Weight - 7kg

• Drill Bit Diameter Handheld - MAX 75mm

• Drill Bit Diameter With Stand - MAX 150mm

DM 430 is a powerful and sturdy electric core drill for medium to heavy core drilling where reliability and high productivity is needed, especially with large diameter core bits. Recommended diameter 100-450 mm. With aluminium motor housing to withstand tough handling and a carrying handle for ergonomic usage and additional impact protection of the drill motor. Equipped with Embedded Connectivity, an enhanced version of Husqvarna Fleet Services™ for data analytics and insights into the health of the machine. Suitable for water evacuation, ventilation, angle drilling , stitch drilling and when you need cut close to corners. Stand sold seperately.

• DRILL MOTOR DM 430 220-240V | 1-ph | 50-60Hz | AU | 1 1/4"

• Rated Input Power - 3.2kW

• Drill Bit Diameter With Stand - MAX 450mm

• Recommended Drill Bit Diameter - MIN 100mm

DMS 240 is an electric drill motor and stand system for a huge variety of core drilling applications. It is the most powerful system in our drill motor stand range. An ideal system for medium core drilling in walls, floors and roofs up to 250 mm diameter. The stand is easy to tilt, the back support provides reliable and stable angle drilling, saving you setup time and body stress. This system can be used for drilling ventilation and plumbing channels, waste evacuation pipes as well as barrier and road signs.

• DRILL MOTOR DMS 240 220-240 V | 1-ph | 50 Hz | AU

• Rated Input Power - 2.4kW

• Drill Bit Diameter - MAX 250mm

DS 250 is a mid-sized drill stand. This lightweight stand made of aluminium has a combined base plate to enable both anchoring and vacuum. An ideal choice for core drilling applications up to 250 mm diameter. Suitable for stitch and angle drilling for ventilation and plumbing.

• DRILL STAND DS 250 EU+RoW

• Weight - 16kg

• Drill Bit Diameter - MAX 250mm

• Travel Length - MAX 685mm

DS 500 is a medium-size drill stand, suitable for a wide range of professional core drilling operations. Combines high stability and sturdiness with surprisingly low weight. The quick connection features and low weight make handling easy and efficient. The slim-design carriage with optimised gear ratio works exceptionally well with Husqvarna DM 400, DM 430, DM 370 and similar high-powered 1-phase drill motors.

• Weight - 17.6kg

• Drill Bit Diameter - MAX 500mm

• Travel Length - MAX 706mm

DS 900 is a drill stand for big diameter core drilling. It is a robust, stable stand ideal for tough applications. DS 900 works especially well together with DM 700 core drill motor, part of the PRIME™ product range. The excellent power-to-weight ratio and user-friendly setup together with the high stability and robustness of the stand, offer you a complete setup and is the perfect choice for heavy-duty applications. DS 900 is designed with the same column as the wall saws in the WS 400 range. This makes it a very flexible system since the column is interchangeable between drill stand and wall saw.

• Weight - 24kg

• Drill Bit Diameter- MAX 900mm

• Travel Length - MAX 950mm

Husqvarna’s robust FS 400 LV is a convenient all-round petrol push floor saw. The adjustable handle ensures an ergonomic working position. Perfect weight distribution gives excellent stability while sawing. Ideal for small road repair jobs in concrete or asphalt, up to 189 mm cutting depth.

• FLOOR SAW FS 400 LV 11.7 hp | 450mm | CE | Honda

• Output Power (as rated by the engine/motor manufacturer) - 8.7kW

• Blade Diameter - MAX 450mm

• Cutting Depth - MAX 162mm

FS 3500 G is a self-propelled walk behind floor saw ideal for small to medium patch and service jobs. Equipped with a 27.5 kW Kohler gasoline engine. It is lightweight, low profiled, easy to manoeuvre and service. The Poly-V belt together with a self-adjusting belt tensioner ensures stable power levels at the blade shaft. Cutting depth capacity up to 311 mm with a 750 mm diamond blade. Comes standard with adjustable handle bars, engine tachometer and hour meter. Water pump kit and light kit available as options.

• FLOOR SAW FS 3500 G 750mm | CE

• Output Power as rated by the engine/motor manufacturer) - 28.3kW

• Blade Diameter - MAX 750mm

• Cutting Depth - MAX 312mm

Husqvarna Smart-E is our most powerful concrete vibrator for professional customers. It is an electronic high frequency vibrator with an intelligent, integrated frequency converter, combining reliability and performance with the latest technology. The high centrifugal force, stable speed and high amplitude ensure excellent concrete vibration with fewer dips. The pistol grip handle is perfectly suited for vibration of floors and reduces hand/arm vibrations.

• POKER SMART | 230V | 1 ph | 50/60 Hz | EU

• Hose Length - 0.5m

• Cable Length - 15m

Husqvarna Smart is our most powerful concrete vibrator for professional customers. It is an electronic high frequency vibrator with an intelligent, integrated frequency converter, combining reliability and performance with the latest technology. The high centrifugal force, stable speed and high amplitude ensure excellent concrete vibration with fewer dips. It’s ergonomic design reduces hand/arm vibrations, while the lengthy cable and hose provide exceptional reach.

• POKER SMART 56 | 230V | 1-Phase | 50/60 Hz

• Cable Length - 15m

• Tube Diameter - 56mm

Husqvarna Smart is our most powerful concrete vibrator for professional customers. It is an electronic high frequency vibrator with an intelligent, integrated frequency converter, combining reliability and performance with the latest technology. The high centrifugal force, stable speed and high amplitude ensure excellent concrete vibration with fewer dips. It’s ergonomic design reduces hand/arm vibrations, while the lengthy cable and hose provide exceptional reach.

• POKER SMART 48 | 230V | 1-Phase | 50/60 Hz

• Cable Length - 15m

• Tube Diameter - 48mm

BV 30 is a versatile, petrol-driven walk-behind concrete power screed designed to deliver a high-quality slab. It is equipped with a twin de-vibrated and foldable handle, which can be adjusted for comfort and manoeuvrability. Interchangeable blades allow for five different working widths, while the non-corrosive chromed steel handle provides maximum strength and superior finish.

• SCREED BV 30 GAS | Honda GX35

• Fuel Tank Volume - 0.65 l

• Output Power (As rated by the engine/Motor manufacturer) - 1kW

The battery-powered BV 30i provides improved ergonomics, easy operation and low maintenance. Thanks to its easy manoeuvring, zero CO₂ emissions during use and no need to purchase and fill oil and petrol, this machine stands for a better work environment. It also enhances flexibility, as it can be used indoors, operates on batteries that fit other Husqvarna battery products and is compatible with all existing BV 30 screed profiles. BV 30i requires very low maintenance. Thanks to its battery-powered engine, there are less wear parts, no oil changes needed and the risk of using the wrong fuel is a thing of the past.

• SCREED BV 30i Battery Driven

• Output Power- 0.8kW

• Weight - 11.5kg

• Blades sold separately

Screed blades for the versatile, petrol-driven walk-behind concrete power screed Husqvarna BV 30 are designed to deliver a high-quality slab. Can be used on thin slabs up to 100 mm without other vibration. Interchangeable blades allow for five different working widths. With their round ends, the blades are designed to leave the least possible marks so that less additional surface work is required. Since the blades are lightweight and rigid the vibration will be transferred uniformly to deliver a high-quality slab finish.

• Multiple working widths - interchangeable blades

• User and service friendly

• Professional results, every time

• Quality and durability

• Easy cleaning

BV 20 H is a manual, lightweight walk-behind concrete screed, designed to provide a high-quality slab. The specially designed, articulated handle facilitates easy adjustment of the pitch angle so the beam works in both directions, and the non-corrosive aluminium alloy finish ensures easy maintenance. It has a working width of two meters and a telescopic handle for extra reach.

Features:

• Quality that lasts - There’s little need for maintenance due to lightweight, non-corrosive aluminium profiles.

• Designed for easy use - The lightweight design and articulated handle makes it easy to adjust and operate.

• Long reach - The standard inter-connectable handle makes it possible to work from outside the slab with a long reach. The optional extra handle extends your reach even farther.

• Professional results, every time - The rigid bottom plate features a slightly V-shaped profile that drives excess concrete backwards and refills any footprints you might make.

Specifications:

• Working Width: 2000mm

BV 20 G is a petrol-powered, vibrating walk-behind concrete power screed designed to provide a high-quality slab. The fuel-efficient Honda engine delivers reliable operation, and the non-corrosive aluminium alloy finish ensures easy maintenance. For perfect results, the vibrations can be adjusted with the engine speed. It can be used directly on thin slabs up to 150mm without vibrating beforehand.

• SCREED BV 20 G | Honda GX25 | 2 M

• Working Width - 200cm (2m)

• Fuel Tank Volume - 0.58l

• Output Power (As rated by the Engine/Motor Manufacturer) - 0.72kW

The Husqvarna Soff-Cut 150 saw is designed for residential and light commercial applications. The lightest petrol saw in the Soff-Cut range, the 150 is designed for ease of use and convenience. Features include a patented low noise blade enclosure which allows the unit to be used in residential areas with minimal disruption. In addition, the low-dust blade block system allows the saw to cut dry, and it controls the debris for easy cleanup.

• EARLY ENTRY SAW Soff-Cut 150 | 5.5 hp | 6" | Kohler | Dust Port Co

• Upgraded guide arm

• Cutting Depth - MAX 38.1mm

• Blade Diameter - MAX 165mm

• Output Power as rated by the engine/Motor manufacturer) - 4kW

The Husqvarna Soff-Cut 4000 self-propelled petrol saw is designed for heavy-duty commercial, industrial and paving applications. Features include a 20 hp twin-cylinder engine with overhead valves, heavy-duty air cleaner, electric start, full pressure lubrication, hydraulic valve lifters and a mechanical fuel pump. Three blade widths can be used, allowing different joint widths and crack control simultaneously.

• EARLY ENTRY SAW Soff-Cut 4000 | 20.5 hp | 13-1/2" | Kohler | DPC | CE

• Cutting Depth - MAX 70mm

• Output Power (as rated by the engine/motor manufacturer) - 15.3kW

• Soff-Cut® technology

PG 280 is a single disc floor grinder that you can quickly convert for edge grinding on both sides. It efficiently grinds adhesives, paint, epoxy and spackle. With a grinding width of 280 mm it is suitable for small to medium concrete areas. Designed to facilitate an ergonomic work position, it is easy and convenient to use. The machine is light and compact and therefore easy to transport and set-up. In a recent upgrade, the machine was updated to flexibly follow uneven floors and to considerably reduce vibrations.

• FLOOR GRINDER PG 280 | 220-240V | 1 ph | 50Hz | AU | 10A

• Single disc

• Quick conversion to edge grinding

• Easy to transport and set-up

• Easy to use

• Easy removal

The PG 510 is a planetary floor grinder with three grinding discs and a total grinding width of 515 mm. It is suitable for removing coatings, grinding and polishing concrete, etc. The grinding head on the PG 510 is effectively sealed to keep dust and moisture out. This greatly extends the lifetime of the bearings and belts. The PG 510 is ideal as a rental machine and suitable for both professional and semi-professional work. Quick-release couplings allow the grinding head to be separated from the chassis which can then be easily folded for transport. The grinder also has a digital hour meter.

• Output Power - 4kW

• Grinding Width - 515mm

• Weight - 133kg

• Easy to use

• Efficient dust management

• Easy to transport and set-up

• Planetary operation

• Sealed grinding head

• Time saving tool change

• Hour meter

• Redi Lock®

The PG 540 (3 hp / 2.2 kW) is a single phase, compact and versatile planetary floor grinder, perfect for smaller jobs. It combines a smart compact design for easy transportation with real work-horse performance and sheer grinding power. Thanks to the split-chassis design, the PG 540 fits in most standard cars. It's easy to handle, tilt and operate with optional adjustable weights for extra grinding pressure. Suitable for all applications: floor prep, grinding and polishing. The PG 540 is the compact choice for the Husqvarna Superfloor™ concrete polishing system. To maximise reliability and reduce maintenance, the vital components of the PG 540 are protected against dust and slurry inside the hermetically sealed grinding head and electrical cabinet.

• FLOOR GRINDER PG 540 220-240 V | 1-ph | 50-60 Hz | AU

• Rated Input Power - 22kW

• Grinding Width - 515mm

• Weight - 169kg

The PG 540 (5.5 hp / 4.0 kW) is a powerful, compact and versatile planetary floor grinder perfect for smaller jobs. Available in both single phase and three phase. It combines a smart compact design for easy transportation with real work-horse performance and sheer grinding power. Thanks to the split-chassis design, the PG 540 fits in most standard cars. It's easy to handle, tilt and operate with optional adjustable weights for extra grinding pressure. Suitable for all applications: floor prep, grinding and polishing. The PG 540 is the compact choice for the Husqvarna Superfloor™ concrete polishing system. To maximise reliability and reduce maintenance, the vital components of the PG 540 are protected against dust and slurry inside the hermetically sealed grinding head and electrical cabinet.

• FLOOR GRINDER PG 540 380-415V | 3-ph | 50-60 Hz | AU

• Rated Input Power - 4kW

• rinding Width - 515mm

• Weight - 178kg

The PG 690 is a versatile and powerful floor grinder but still compact enough to pass through a standard door (total width: 26 in / 67 cm). This is the go-to-choice for most grinding jobs, both industrial and commercial, and for users that prefer a non-motorised drive. The planetary drive system and the improved, Husqvarna-unique Dual Drive Technology™ deliver excellent grinding performance. Adjustable weights for extra grinding pressure and LED lights are optional. Suitable for all applications: floor prep, grinding and polishing. A good choice for the Husqvarna Superfloor™ concrete polishing system. To maximise reliability and reduce maintenance, the vital components of the PG 690 are protected against dust and slurry inside the hermetically sealed grinding head and electrical cabinet.

• FLOOR GRINDER PG 690 380-415 V | 3-ph | 50-60 Hz | AU

• Rated input power - 12.5kW

• Phases - 3

• Grinding width - 640mm

• Weight - 502kg

The PG 690 RC is a remote controlled, powerful floor grinder but still compact enough to pass through a standard door (total width: 26 in / 67 cm). The remote control sets the operator free to manage hoses and cables while still grinding, for up to 40% higher productivity. The motorised drive also simplifies transportation. This is the go-to-choice for most grinding jobs, both industrial and commercial. The planetary drive system and the improved, Husqvarna-unique Dual Drive Technology™ deliver excellent grinding performance. Adjustable weights for extra grinding pressure and LED lights are optional. Suitable for all applications: floor prep, grinding and polishing. A high performing machine for the Husqvarna Superfloor™ concrete polishing system. To maximise reliability and reduce maintenance, the vital components of the PG 690 are protected against dust and slurry inside the hermetically sealed grinding head and electrical cabinet.

• FLOOR GRINDER PG 690 RC 11+1.5kW |3x400V |3-ph |50-60Hz |32A |AU

• Phases - 3

• Rated input power - 12.5kW

• Rated output power - 12.5kW

• Grinding Width - 640mm

• Weight - 598kg

The PG 830 is the largest and most powerful floor grinding machine in the Husqvarna PG-range. A new 15 kW motor is available in the range which means power is up by 36% compared to the 15 hp / 11 kW motor. This is a powerful choice for most grinding jobs, both industrial and commercial, and for users who prefer non-motorised drive. The planetary drive system and the improved, Husqvarna-only Dual Drive Technology™ deliver extreme productivity. Adjustable weights for extra grinding pressure and LED lights are optional. Suitable for all applications: floor prep, grinding and polishing. A high performing machine for the Husqvarna Superfloor™ concrete polishing system. To maximise reliability and reduce maintenance, the vital components of the PG 830 are protected against dust and slurry inside the hermetically sealed grinding head and electrical cabinet.

• FLOOR GRINDER PG 830 380-415 V | 3-ph | 50-60 Hz | AU

• Rated input power - 16.5kW

• Phases - 3

• Grinding width - 800mm

• Weight - 556kg

The PG 830 RC is the largest and most powerful remote-controlled floor grinder in the Husqvarna PG-range. The remote control sets the operator free to manage hoses and cables while still grinding, for up to 40% higher productivity. The motorised drive also simplifies transportation. A new 20 hp / 15 kW motor is available in the range which means power is up by 36% compared to the 11 kW motor. This is a powerful choice for most grinding jobs, both industrial and commercial. The planetary drive system and the improved, Husqvarna-only Dual Drive Technology™ deliver extreme productivity. Adjustable weights for extra grinding pressure and LED lights come as option. Suitable for all applications: floor prep, grinding and polishing. The motorised drive enables easy transportation, improved ergonomics and outstanding grinding results. The PG 830 RC is the ultimate choice for the Husqvarna Superfloor™ concrete polishing system. To maximise reliability and reduce maintenance, the vital components of the PG 830 are protected against dust and slurry inside the hermetically sealed grinding head and electrical cabinet.

• FLOOR GRINDER PG 830 RC 380-415 V | 3-ph | 50-60 Hz | AU

• Rated input power - 16.5kW

• Phases - 3

• Grinding Width - 800mm

• Weight - 652kg

This versatile H-class dust extractor is compact and easy to transport, yet powerful. It is equipped with a user friendly HMI that monitors performance and an e-flow function that automatically adjusts the air flow, enabling stable air flow and extending intervals between filter-cleanings. Its high water protection allows fast and efficient decontamination. It also features embedded connectivity allowing you to swiftly monitor location, run-time, service and filter status along with other valuable usage data.

• DUST EXTRACTOR DE 110 | 230V | 1-ph | AU

• Rated input power - 1.1kW

• Weight - 25kg

A 1000 is one of the most advanced portable air cleaners available on the market. It is tested and certified for use as both an air cleaner and a negative air machine. Thanks to a reliable filter system and a design that is perfectly matched to operation with HEPA class H13 filters, that are tested and certified at an efficiency rate of 99.99% at 0.3 microns, the air cleaner puts out superior air quality – be it when dealing with concrete dust, fine sanding dust or gypsum dust. It has two warning lights to indicate when the filters are clogged or leaking. A 1000 is a quiet-operating air scrubber with a sturdy, compact cabinet. Airflow can be set at two different speeds. The airflow is directed upwards to avoid disturbing dust on surfaces.

• AIR SCRUBBER A 1000 | 230V | 1 ph | AU

• Phases - 1~

• Air Requirement - 1000 m³/h

• Rated Input Power - 0.3 kW

A 2000 is one of the most advanced portable air cleaners available on the market. It is tested and certified for use as both an air cleaner and a negative air machine. Thanks to a reliable filter system and a design that is perfectly matched to operation with HEPA class H13 filters, that are tested and certified at an efficiency rate of 99.99% at 0.3 microns, the air cleaner puts out superior air quality – be it when dealing with concrete dust, fine sanding dust or gypsum dust. It has two warning lights to indicate when the filters are clogged or leaking. Operates at two very quiet speeds. Thanks to the compact design, the unit is easy to move and transport. Non-marking, lockable wheels allows for easy transport.

• AIR SCRUBBER A 2000 | 230V | 1 ph | AU

• Phases - 1~

• Rated Input Power - 0.75 kW

C 3000 is an effective industrial pre-separator for really big jobs where a lot of dust is produced. Recommended as a supplement to your Husqvarna dust extractor S 26 and S 36. C 3000 separates 90% of the vacuumed material before it reaches the dust extractor, which greatly increases the suction capacity, extends motor life and significantly reduces the frequency of filter maintenance, thus giving you longer operation without interruption. Using a pre-separator enhances the dust extractor’s capacity to handle material that would normally be considered difficult to manage such as soot, liquids and light material in large quantities. The Longopac® bag hose system ensures simple, dust-free bag changes. Can be used for both wet and dry applications.

• PRE SEPARATOR C 3000

• Weight - 22kg

• Durable Design

• Easy to Transport

• Increased Productivity

• Clean and Simple Bag Change

This versatile H-class dust extractor is powered by Husqvarna’s own 36 V BLi batteries and is an excellent match for handheld battery equipment. It features a user-friendly HMI and an e-flow function that automatically adjusts the air flow while securing high runtime from the batteries. Its high water protection enables fast and efficient decontamination. It also features embedded connectivity allowing you to swiftly monitor location, service and filter status along with other valuable usage data.

• DUST EXTRACTOR DE 110i 36V | RoW

• Rated Input Power - 0.9kW

• Weight - 26kg

This versatile H-class dust extractor is compact and easy to transport, yet powerful. Its three-stage filtration process inlcuding large filter surfaces enables long run-time between filter cleanings. Its high water protection allows fast and efficient decontamination.

• DUST EXTRACTOR DE 110 S | 230V | 1-ph | AU

• Rated Input Power - 0.9kW

• Weight - 25kg

Husqvarna S 11 is a compact and portable H-classified wet and dry industrial vacuum cleaner for general cleaning and handheld tools. It is equipped with HEPA-filters and offers automatic filter cleaning by shaking the filter during operation for a continuous air-flow. This vacuum unit is very easy to transport and handle thanks to its compact design, low weight and convenient carry handle.

• VACUUM S 11 | 230V | 1 ph | AU

• Phases - 1~

• Weight - 16kg

• Rated Input Power- 1.2 kW

• High Productivity

• Excellent Mobility

• Efficient Filtration System

• Auxiliary Outlet

This versatile H-class dust extractor is compact and easy to transport, yet powerful. It is designed for use with larger hand-held power-tools, floor and hand grinders, shotblasters, scarifiers and more. Its performance and sturdiness make the DE 120 ideal for demanding, heavy-duty applications. It features a user-friendly HMI and an e-flow function that automatically adjusts air flow while securing high runtime from the batteries. Its high water protection enables fast and efficient decontamination. It also features embedded connectivity allowing you to swiftly monitor location, service and filter status along with other valuable usage data.

• DUST EXTRACTOR DE 120 | 230V | 1-ph | AU

• RATED INPUT POWER - 2.2kW

• WEIGHT - 39kg

Husqvarna’s S 36 is a very powerful single-phase HEPA dust extractor to match the grinding machines Husqvarna PG 530 (1-phase), PG 450, PG 400 and PG 280 as well as small to mid size scarifiers, grinders, shot blasters and handheld power tools. This professional dust extractor is designed to meet strict demands. Three large, commercial-grade vacuum motors provide plenty of power. Equipped with three independently tested and certified HEPA H13 filters and a massive cone-shaped pre-filter with over 4.5 m² of media. This results in superior dust collection, even of fine sanding and gypsum dust. Features include Jet Pulse pre-filter cleaning, hour counter and vacuum meter for filter control. The non-marking wheels are puncture free and lock at the front. The Longopac® bag hose system ensures simple, dust-free bag changes.

• DUST EXTRACTOR S 36 | 230V | 1 ph | AU

• Air Requirement- 600m³/h

• Rated Input Power - 3.6kW

• Weight - 63kg

T 7500 is an effective industrial dust extractor to match the grinding machines Husqvarna PG 820, PG 680 and PG 400 (3-phase) as well as shavers, shot blasters and saws. Ideal for heavy-duty work and exacting demands on dust extraction. T 7500 is equipped with a quiet, yet powerful turbine motor delivering exceptional airflow. The machine can deal with materials that are difficult to handle, such as grinding dust and demolition materials in a wide variety of applications. Has a reliable filter system with high collecting efficiency and a long filter life, and can deal with large quantities of fine dust. Comes with two oversized tested and certified HEPA class H13 filters and sock-style pre-filters providing nonstop grinding and a long service life. The pre-filters can be cleaned from outside of the tank via Jet Pulse negative air pressure. The Longopac® bag hose system ensures simple, dust-free bag changes.

• DUST EXTRACTOR T 7500 400 V | 3-ph | AU

• Phases - 3~

• Air Requirement - 600 m³/h

• Rated Input Power - 5.5 kW

W 70 is a durable and efficient industrial wet and slurry vacuum designed for tough jobs. It's also known for its long, trouble-free service life. This is achieved by using high quality stainless steel components and a special combination of filter and float that protects the motor. Where most wet vacs can only handle water, W 70 can deal with liquids such as concrete slurry, oils and machining coolants. Recommended for concrete drilling, sawing, grinding and wall/wire sawing. Emptying is carried out via a large bottom valve for simple cleaning. The non-marking wheels are puncture-free and lock at the front.

• SLURRY VACUUM W 70 | 230V | 1 ph | AU

• Phases - 1~

• Air Requirement - 200 m³/h

• Rated Input Power - 1.2 kW

• Renowned Durability

• Reliable Overfill Shut-Off

• Easy to Transport

• Multipurpose Use

W 70 P is a powerful industrial wet and slurry vacuum designed for the toughest jobs. This is achieved by using high quality stainless steel components and a special combination of filter and float that protects the motor. Where most wet vacs can only handle water, W 70 P can deal with liquids such as concrete slurry, oils and machining coolants. Recommended for concrete drilling, sawing, grinding and wall/wire sawing. Ingenious solutions make W 70 P easy to work with. Pumping out can take place at the same time as suction. Emptying is carried out via a large bottom valve for simple cleaning. The non-marking wheels are puncture-free and lock at the front.

• ACUUM W 70 P | 230V | 1 ph | AU

• Phases - 1~

• Air Requirement - 200 m³/h

• Rated Input Power - 1.85 kW

• Renowned Durability

• Reliable Overfill Shut-Off

• Extreme Pumping Pressure

• Easy to Transport

• Multipurpose Use

• Integral Stainless Steel Strainer

• Husqvarna hard hats are made with the highest quality materials

• Complies with relevant safety standards

If there is no water supply nearby, you can use a pressurized water tank. Pumping the handle a few times gives the required pressure. The tank holds 13,3 litres and comes complete with a 3-metre hose which is connected to the wet cutting kit on the machine.

• 6L fuel can with no spill

• Optimal - Concrete, Granite, Marble, Natural stone, Cured concrete medium

• Good - Reinforced concrete, Brick, Roof tile, Cured concrete hard

• Acceptable - Ceramic tiles, Porcelain

• Suits - K3600, K6500 Ring, K970 Ring

• Ideal for concrete and hard materials - developed for fast cutting in universal construction materials, with a focus on hard materials like granite and hard concrete

• The original Ring blade - Husqvarna-developed ring blade and drive disc

• Drive disc included - a drive disc is included with every Ring blade

• Smooth and free-cutting start - the design of the segment provides a reduced contact surface in the concrete, this gives a quick start in a controlled manner, when applying a new blade

Specifications;

• Blade Diameter: 370 mm

• Segment Height: 9 mm

• Segment Length: 33 mm

• Segment Width: 42 mm

• Number of Segments: 22

• Husqvarna 350mm Segmented Diamond Blade for Concrete & Hard Materials - Vari-Cut S35

• HUSQVARNA® ELITE-CUT Gold Series are the highest performance and quality blades from the global leaders in diamond tools

• ELITE-CUT S450 Segmented Diamond Blades are designed for general purpose cutting of masonry materials such as reinforced concrete, concrete blocks, bricks and pavers

• With its medium bond, this blade can cut both harder and softer (abrasive) materials

  Specifications;

• Blade Diameter: 415 mm (16")

• Bore Diameter: 25.4 mm (1")

• Kerf Thickness: 3.2 mm

• Plate Thickness: 2.2 mm

• Segment Height: 15 mm

• Blade Configuration: Segmented

• Bond Configuration: Medium

• Husqvarna 150mm Segmented Soffcut Diamond Blade w.skid - Red

• Husqvarna 150mm segmented soffcut diamond blade w.skid - Yellow

• Husqvarna 150mm segmented soffcut diamond blade with skid - Purple

• Husqvarna Starter Rope

• Fits - K760, K770, K950, K960, K970

• Fits all Husqvarna hand held saws (Genuine Husqvarna product)

• The Low Smoke+ oil is a mix of mineral and synthetic oils

• It gives off very little smoke and has extremely good lubrication qualities on high load engine details, like for instance the connecting rod bearing

• This oil gives very low smoke emissions, especially important when used in products often run in densely built up areas

• It also provides a lower engine temperature which extends the engine’s life

• The formulation used in Husqvarna Low Smoke + oil gives very good seizure protection, both against lean as well as carbon related piston seizures

• Suitable for all Husqvarna 2-stroke models when mixed with regular unleaded fuel