Professional Walk-Behind Clearing Power

The OREC HR812 Bull Walk-Behind Flail Mower is built for serious brush clearing and mulching. Designed to tackle tall grass, weeds, brambles and small saplings, its heavy-duty flail system cuts and mulches in a single pass for efficient, consistent results.Featuring multiple pivoting flail blades, the HR812 absorbs impact when striking obstacles to help protect the drivetrain, while its up-cut cutting action captures and processes the entire plant rather than just the base. A guarded deck design improves safety by helping contain debris, and intuitive controls with easy cutting-height adjustment ensure smooth, stress-free operation in demanding conditions.

Designed for commercial landscapers, local authorities, and estate managers, the HR812 cuts and mulches dense vegetation in a single pass, leaving a clean, uniform finish while keeping operator safety and control at the forefront.

Key Features & Benefits

• High-Performance Cutting Drum: Equipped with 46 free-swinging flail blades on a robust rotor that finely shreds thick brush, weeds, and woody growth down to manageable mulch.

• Reliable Honda Power: Powered by a dependable Honda GX340 (389 cc) commercial petrol engine delivering 10.5 to 10.7 hp for consistent torque and easy starting.

• Mechanical Transmission & Differential Lock: Features a 3-forward and 1-reverse mechanical gearbox coupled with a lockable differential, providing exceptional traction on slopes and rough, slippery terrain.

• Side-Clutch Steering: Includes lockable side-clutches for smooth, stress-free turning and maneuvering around tight obstacles and fence lines.

• Adjustable Handlebars: The handles are fully adjustable both vertically and horizontally to maximize operator comfort during extended work sessions.

• Enhanced Safety Design: Unlike standard rotary mowers, the flail housing and steel flap guards help contain flying debris securely inside the deck.

Technical Specifications

• Engine: Honda GX340 OHV (4-stroke, petrol, 389 cc, 10.5 hp)

• Fuel Tank Capacity: 6.1 Litres

• Cutting Width: 800 mm (80 cm)

• Cutting Height Range: Infinitely variable / 50 mm – 110 mm (or 20–80 mm depending on regional setup)

• Transmission: Mechanical – 3 Forward / 1 Reverse

• Travel Speeds:

  Forward: 0.94 km/h to 3.45 km/h

  Reverse: 0.94 km/h

• Climbing Capability: Up to 15 degrees

• Dimensions (L x W x H): 1,645 mm × 940 mm × 930 mm

• Weight: 155 kg

Unstoppable Traction and Heavy-Duty Power

he Orec Walk-Behind Tracked Flail Mower (HR812 CTR01) pairs the proven, high-performance cutting capacity of the legendary Bull flail mower lineup with a heavy-duty Honda GX390 commercial engine and an advanced all-terrain crawler track system.

When the landscape is too steep or the brush too dense for standard equipment, this brush-mulching beast does the heavy lifting for you! Designed to easily take down tall grass, stubborn weeds, thick brambles, and even small saplings, it turns impenetrable overgrowth into fine mulch in a single pass.

Engineered for professionals working on extreme gradients, wet mud, and unstable ground, this tracked configuration ensures maximum grip where traditional wheels slip, allowing you to clear dense brush and steep embankments with absolute confidence.

Key Features & Benefits

• High-Performance Honda GX390 Power: Driven by a robust Honda GX390 (389cc, 13 hp) commercial-grade 4-stroke petrol engine, delivering exceptional torque, dependable reliability, and effortless starting under heavy loads.

• All-Terrain Triangular Crawler Tracks: Replaces standard wheels with high-traction rubber tracks that drastically increase ground contact area. This lowers ground pressure, eliminates punctures, and locks securely onto steep slopes and slippery, waterlogged terrain.

• Multi-Flail Mulching Drum: Equipped with dozens of heavy-duty, free-swinging flail blades that pulverize tall grass, thick weeds, brambles, and woody saplings into a fine mulch in a single pass.

• Safe, Guarded Deck Design: The rugged steel housing and protective flap guards help safely contain flying debris, making it ideal for clearing near property lines, fences, and public access zones.

• Precise Operator Control: Balanced weight distribution and responsive steering levers allow smooth maneuvering through tight spaces and treacherous terrain while minimising operator fatigue.

Technical Specifications

• Engine: Honda GX390 OHV (4-stroke, petrol, 389 cc, 13 hp)

• Drive System: All-Terrain Rubber Crawler Tracks

• Cutting Width: 800 mm (80 cm)

• Cutting System: Multi-flail blade drum

• Application: Steep embankments, dense brush, fire break maintenance, and rough or boggy acreage

The Flagship of the Bull Mower Range

The Orec ZHR800 is the flagship model in OREC's renowned Bull mower series, engineered specifically for maximum power, heavy-duty durability, and ultimate control in the most demanding clearing conditions.

By combining zero-turn maneuverability with an efficient stand-on platform, the ZHR800 bridges the gap between walk-behind precision and ride-on productivity. Whether you are tackling dense brush, overgrown fields, or challenging rough terrain, this machine delivers unmatched efficiency and professional results.

Key Features & Benefits

• Zero-Turn Performance & Speed: Equipped with a responsive hydrostatic transmission and zero-turn steering, the ZHR800 allows for smooth, tight maneuvers around obstacles, fence lines, and trees. It features high and low ranges with a top forward speed of 7.5 km/h to maximize daily output.

• Heavy-Duty Cutting Deck: Built around a rugged, impact-resistant Corten steel rotary deck, the ZHR800 confidently shreds thick scrub, heavy weeds, and overgrown grass.

• 46-Flail Multi-Blade Drum: Utilizes a heavy-duty drum setup featuring 46 free-swinging flail blades operating in an up-cut motion to finely mulch dense vegetation down to a clean finish.

• Fingertip Electric Height Adjustment: Easily adjust the cutting height on the fly via a convenient electronic hydraulic cylinder control ranging from 30 mm to 80 mm.

• Stand-On Ergonomics & Visibility: The elevated stand-on platform provides the operator with an exceptional, unobstructed viewpoint of the cutting zone and surrounding terrain, reducing fatigue while enhancing safety and control.

• Built for Safety: Designed with a rapid-dismount stand-on layout, an emergency stop switch, and an integrated parking brake for complete operator peace of mind.

Technical Specifications

• Engine: Honda GX390 (4-stroke, petrol, OHV, 389 cc, 13 hp)

• Cutting Width: 800 mm (32 inches)

• Cutting Height: 30 mm – 80 mm (Electric Hydraulic Adjustment)

• Transmission: Hydrostatic Zero-Turn

• Travel Speeds:

  Forward: Low (0 – 4.5 km/h) / High (0 – 7.5 km/h)

  Reverse: Low (0 – 2.6 km/h) / High (0 – 4.5 km/h)

• Climbing Capability: Up to 25 degrees

• Fuel Capacity: 6.1 Litres

• Battery sold separately

• Dimensions: 1,725 mm (L) × 1,000 mm (W) × 1,140 mm (H)

• Weight: 320 kg

Engineered for comfort, control, and absolute confidence throughout the working day—the Orec ZHR800 is the ultimate commercial solution for professional property maintenance and land clearance.

Overview: The Ultimate Beast for Steep Hills and Heavy Brush

When you need to clear the toughest overgrown brush, tall weeds, and dense thickets on steep slopes and challenging terrain, the Orec 4WD Rabbit Mower (RM985F / CTR05) is a true beast of a machine.

Combining high-horsepower commercial performance with true four-wheel-drive capability, the RM985F makes short work of rugged, uncultivated landscapes and tackles steep hills with ease, minimizing physical strain on the operator. Engineered to conquer gradients and rough acreage, it delivers supreme stability, comfort, and unmatched cutting power where standard mowers fail.

Built in Japan by OREC using an integrated production process—including in-house transmission manufacturing—the RM985F reflects the durability and long-service-life focus that OREC applies across its entire professional range.

Key Features & Benefits

• High-Performance Commercial Engine: Powered by a robust, high-displacement Kawasaki V-Twin commercial petrol engine, delivering exceptional torque and reliable power under heavy-load cutting conditions.

• True 4WD Capability & Differential Lock: Equipped with an advanced on-demand 4WD system and a differential lock, ensuring maximum traction and climbing safety on steep hills, slippery embankments, and uneven ground.

• Rugged Hydrostatic Transmission: Features a heavy-duty hydrostatic drive system (utilising a Tuff Torq front transmission and Orec-engineered rear transmission) for smooth, stepless speed control.

• Wide Cutting Deck & Adjustable Height: Offers a generous 975 mm cutting width to maximizsdaily output, with an adjustable cutting height ranging from 50 mm to 120 mm to suit varying terrain conditions.

• Operator Comfort & Control: Designed with ergonomic adjustments, responsive steering, and a rugged frame built to absorb the impacts of aggressive brush clearing.

Technical Specifications

• Engine: Kawasaki Commercial V-Twin Petrol

• Displacement: 726 cc

• Cutting Width: 975 mm (approx. 38.4 inches)

• Cutting Height: 50 mm – 120 mm (Infinitely variable)

• Transmission: Hydrostatic (Tuff Torq KXH10F Front / Orec Rear Transmission)

• Drive System: True 4WD with Differential Lock

• Travel Speeds:

  Forward: 0 – 10.0 km/h

  Reverse: 0 – 8.0 km/h

• Climbing Ability: Up to 20 degrees

• Fuel Tank Capacity: 12.5 Litres

• Battery sold separately

• Dimensions (L x W x H): 2,010 mm × 1,045 mm × 1,055 mm

• Weight: 350 kg

The Ultimate Obstacle-Safe Mower for Solar Farms & Orchards

Meet the Orec Rabbit Ride-On Rotary Mower with Side-Cutter MK180 (CTR04) - a fully original, game-changing ride-on rotary mower featuring an innovative side-cutter design. Purpose-built to reach where conventional ride-on mowers simply cannot, the RMK180 is the ultimate solution for precision mowing around solar panel installations, under low tree branches, along fence lines, and inside tight vineyard or orchard rows.

The RMK180 is specialised for mowing under solar panels and low-hanging tree branches thanks to its one-of-a-kind retractable moving blades and outer rubber protection system developed by OREC. This clever design protects plant trunks and structural frameworks during the mowing operation, entirely preventing damage.

Its very compact size and low center of gravity make the Rabbit mower exceptionally agile and quick to cut grass across challenging layouts. Furthermore, the front pivoting wheel axle ensures safe and easy forward movement at all times, even when the ground is uneven or pitted.

Engineered entirely from scratch in Japan—including Orec’s proprietary in-house transmission systems—the RMK180 turns exhausting manual trimming into a faster, safer, and highly efficient operation.

Key Features & Benefits

• Unique Retractable Side-Cutter Wings: Specialized for hard-to-reach zones, the RMK180 features unique retractable moving blades and protective outer rubber edges. This allows you to safely glide right under solar panel arrays, close to tree trunks, and alongside obstacles without risking structural or crop damage.

• Compact Agility & Low Center of Gravity: Its compact footprint and low center of gravity provide exceptional stability and quick maneuverability across uneven or pitted terrain.

• Front Pivoting Wheel Axle: Ensures safe, smooth, and steady forward movement at all times, keeping all wheels grounded even on undulating ground.

• Orec-Engineered Hydrostatic Transmission: Powered by a reliable Kayaba HVFD series hydrostatic drive system, offering smooth, stepless speed control.

• Integrated Differential Lock: Easily engaged when extra traction is needed on slippery turf, slopes, or soft agricultural ground.

Technical Specifications

• Cutting Width / System: Rotary deck with specialized retractable side-cutter wings

• Cutting Height: 50 mm – 100 mm

• Transmission: Kayaba HVFD Series Hydrostatic Drive

• PTO Engagement: Manual Engagement (Belt Tension)

• Travel Speeds:

  Forward: 0 – 10.0 km/h

  Reverse: 0 – 7.0 km/h

• Climbing Capability: Up to 15 degrees

• Battery sold separately

• Dimensions (L x W x H): 1,895 mm × 1,880 mm × 1,000 mm

• Weight: 355 kg

Reach the un-mowable under solar panels and tight canopies with the innovative, 100% original Japanese engineering of the Orec RMK180.

Designed for Tight Rows and Total Control

When standard ride-on mowers are simply too wide to fit, the Orec RM60W Rabbit Mower (CTR03) steps in. Purpose-built for narrow vineyard rows, orchards, and greenhouse cultivation, this ultra-compact ride-on brush mower delivers precise, efficient inter-row mowing where conventional machines cannot go.

Its ultra-compact design and low centre of gravity provide excellent stability, agility, and speed, even on uneven terrain. Featuring an innovative retractable-wing design and offset cutting capability, the RM60W allows operators to mow close to vines while helping prevent trunk damage. Combined with an in-house engineered hydrostatic transmission, it conquers steep terrain and tight aisles with unmatched confidence and simple, intuitive controls.

Key Features & Benefits

• Commercial Vanguard 18HP Engine: Powered by a robust Briggs & Stratton Vanguard 570cc (18 hp) V-Twincommercial engine, delivering dependable power reserves and high torque for heavy grass and brush management.

• Retractable Wing Protection / Offset Cutting: Equipped with adjustable side cutting wings that can be folded out independently, allowing an adjustable working width from 705 mm to 1,155 mm. This enables operators to mow close to vine trunks and under wires without risking plant or infrastructure damage.

• Ultra-Compact Footprint: With a minimum body width starting at just 720 mm, it easily glides through tight 1.5-meter aisles and narrow greenhouse tunnels.

• Orec-Engineered Hydrostatic Transmission: Features a specialised Kayaba HVFD series hydrostatic drive system developed in-house, providing smooth, stepless speed control and exceptional balance on slopes up to 15 degrees.

• Differential Lock: Integrated differential lock engagement ensures maximum traction when operating on wet, uneven, or slippery agricultural ground.

Technical Specifications

• Engine: Briggs & Stratton Vanguard V-Twin (570 cc, 4-stroke, 18 hp)

• Working / Cutting Width: Adjustable from 705 mm to 1,155 mm (via retractable side wings)

• Cutting Height: 50 mm – 100 mm

• Transmission: Hydrostatic (Kayaba HVFD Series)

• Travel Speeds:

  Forward: 0 – 9.0 km/h

  Reverse: 0 – 7.0 km/h

• Climbing Capability: Up to 15 degrees

• Battery sold separately

• Dimensions (L x W x H): 2,000 mm × [720 mm – 1,175 mm] × 1,055 mm

• Dry Weight: 310 kg