Professional Walk-Behind Clearing Power
The OREC HR812 Bull Walk-Behind Flail Mower is built for serious brush clearing and mulching. Designed to tackle tall grass, weeds, brambles and small saplings, its heavy-duty flail system cuts and mulches in a single pass for efficient, consistent results.Featuring multiple pivoting flail blades, the HR812 absorbs impact when striking obstacles to help protect the drivetrain, while its up-cut cutting action captures and processes the entire plant rather than just the base. A guarded deck design improves safety by helping contain debris, and intuitive controls with easy cutting-height adjustment ensure smooth, stress-free operation in demanding conditions.
Designed for commercial landscapers, local authorities, and estate managers, the HR812 cuts and mulches dense vegetation in a single pass, leaving a clean, uniform finish while keeping operator safety and control at the forefront.
Key Features & Benefits
High-Performance Cutting Drum: Equipped with 46 free-swinging flail blades on a robust rotor that finely shreds thick brush, weeds, and woody growth down to manageable mulch.
Reliable Honda Power: Powered by a dependable Honda GX340 (389 cc) commercial petrol engine delivering 10.5 to 10.7 hp for consistent torque and easy starting.
Mechanical Transmission & Differential Lock: Features a 3-forward and 1-reverse mechanical gearbox coupled with a lockable differential, providing exceptional traction on slopes and rough, slippery terrain.
Side-Clutch Steering: Includes lockable side-clutches for smooth, stress-free turning and maneuvering around tight obstacles and fence lines.
Adjustable Handlebars: The handles are fully adjustable both vertically and horizontally to maximize operator comfort during extended work sessions.
Enhanced Safety Design: Unlike standard rotary mowers, the flail housing and steel flap guards help contain flying debris securely inside the deck.
Technical Specifications
Engine: Honda GX340 OHV (4-stroke, petrol, 389 cc, 10.5 hp)
Fuel Tank Capacity: 6.1 Litres
Cutting Width: 800 mm (80 cm)
Cutting Height Range: Infinitely variable / 50 mm – 110 mm (or 20–80 mm depending on regional setup)
Transmission: Mechanical – 3 Forward / 1 Reverse
Travel Speeds:
Forward: 0.94 km/h to 3.45 km/h
Reverse: 0.94 km/h
Climbing Capability: Up to 15 degrees
Dimensions (L x W x H): 1,645 mm × 940 mm × 930 mm
Weight: 155 kg
Professional Walk-Behind Clearing Power
The OREC HR812 Bull Walk-Behind Flail Mower is built for serious brush clearing and mulching. Designed to tackle tall grass, weeds, brambles and small saplings, its heavy-duty flail system cuts and mulches in a single pass for efficient, consistent results.Featuring multiple pivoting flail blades, the HR812 absorbs impact when striking obstacles to help protect the drivetrain, while its up-cut cutting action captures and processes the entire plant rather than just the base. A guarded deck design improves safety by helping contain debris, and intuitive controls with easy cutting-height adjustment ensure smooth, stress-free operation in demanding conditions.
Designed for commercial landscapers, local authorities, and estate managers, the HR812 cuts and mulches dense vegetation in a single pass, leaving a clean, uniform finish while keeping operator safety and control at the forefront.
Key Features & Benefits
High-Performance Cutting Drum: Equipped with 46 free-swinging flail blades on a robust rotor that finely shreds thick brush, weeds, and woody growth down to manageable mulch.
Reliable Honda Power: Powered by a dependable Honda GX340 (389 cc) commercial petrol engine delivering 10.5 to 10.7 hp for consistent torque and easy starting.
Mechanical Transmission & Differential Lock: Features a 3-forward and 1-reverse mechanical gearbox coupled with a lockable differential, providing exceptional traction on slopes and rough, slippery terrain.
Side-Clutch Steering: Includes lockable side-clutches for smooth, stress-free turning and maneuvering around tight obstacles and fence lines.
Adjustable Handlebars: The handles are fully adjustable both vertically and horizontally to maximize operator comfort during extended work sessions.
Enhanced Safety Design: Unlike standard rotary mowers, the flail housing and steel flap guards help contain flying debris securely inside the deck.
Technical Specifications
Engine: Honda GX340 OHV (4-stroke, petrol, 389 cc, 10.5 hp)
Fuel Tank Capacity: 6.1 Litres
Cutting Width: 800 mm (80 cm)
Cutting Height Range: Infinitely variable / 50 mm – 110 mm (or 20–80 mm depending on regional setup)
Transmission: Mechanical – 3 Forward / 1 Reverse
Travel Speeds:
Forward: 0.94 km/h to 3.45 km/h
Reverse: 0.94 km/h
Climbing Capability: Up to 15 degrees
Dimensions (L x W x H): 1,645 mm × 940 mm × 930 mm
Weight: 155 kg
