Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
Oztec Flexible Shafts transmit rotary power from the power source (gas or electric motor) to the vibrating head. They are engineered to be rigid enough to be driven deep into stiff, low-slump concrete without kinking, yet limber enough for comfortable, non-slip handling by the operator.
Standard lengths (in feet): 2, 5, 7, 10, 12, 14, 16, 18 and 21.
Inner Core: Made from extra-high-strength, carbon steel wires to handle high torque and rotational speeds under extreme vibration.
Outer Casing: Constructed from tough, abrasion-resistant neoprene rubber. It is reinforced internally with multiple layers of high-tensile wire braiding and a hardened flat steel liner to protect the rotating core.
Patented Quick Disconnect (QD) System: Equipped with a toolless, bearing-less QD lever mechanism. It allows operators to attach or detach the shaft from the motor housing in seconds with the simple twist of a lever. The coupling is designed not to rust or seize up when exposed to concrete slurry.
Universal Interchangeability: All standard Oztec flexible shafts fit seamlessly onto all Oztec power units (from the 1.25 HP electric up to the 2.5 HP gas backpack) and are compatible with standard vibrator heads.
Reversible Design: The shafts are bidirectional and fully reversible. When the inner core begins to wear on one end, swapping the shaft direction end-for-end effectively doubles its service life.
Oztec Flexible Shafts transmit rotary power from the power source (gas or electric motor) to the vibrating head. They are engineered to be rigid enough to be driven deep into stiff, low-slump concrete without kinking, yet limber enough for comfortable, non-slip handling by the operator.
Standard lengths (in feet): 2, 5, 7, 10, 12, 14, 16, 18 and 21.
Inner Core: Made from extra-high-strength, carbon steel wires to handle high torque and rotational speeds under extreme vibration.
Outer Casing: Constructed from tough, abrasion-resistant neoprene rubber. It is reinforced internally with multiple layers of high-tensile wire braiding and a hardened flat steel liner to protect the rotating core.
Patented Quick Disconnect (QD) System: Equipped with a toolless, bearing-less QD lever mechanism. It allows operators to attach or detach the shaft from the motor housing in seconds with the simple twist of a lever. The coupling is designed not to rust or seize up when exposed to concrete slurry.
Universal Interchangeability: All standard Oztec flexible shafts fit seamlessly onto all Oztec power units (from the 1.25 HP electric up to the 2.5 HP gas backpack) and are compatible with standard vibrator heads.
Reversible Design: The shafts are bidirectional and fully reversible. When the inner core begins to wear on one end, swapping the shaft direction end-for-end effectively doubles its service life.
